Grey, Ultra Fine Scuff Pads 6 x 9, ea

3/32", Bore Solid Shaft Collar Unplated Steel, 1 ct

8-32 Wing Nuts Cold Forged 316 Stainless, 1 ea

M2-0.40 x 10 MM, Machine Screw, Metric Pan Head Torx, T6 (FT) Z/P

M8-1.25 x 1 Meter, Metric All Thread Rod, B7 Coarse Plain

M2-0.40 x 4 MM, Machine Screw, Metric Pan Head Torx T6, 304 Stainless, (FT)

M8-1.25 Class 10 Nylon Flange Locknut Non-Serrated Coarse Z/Y DIN 6926

#9 x 2-1/2", 6 Lobe (350 pcs w/1 #25 Bit) Deck & Outdoor Screw, 1 Ctn

#6-32 x 3/8", Low Head Socket Cap Screw, UNC 304 Stainless (FT)

5/16"-18 Hex Jam Nut Stainless Steel 316

M4-0.70, Metric Wing Nut 304 Stainless Steel, 25 ea

#10-32 x 3/4" Thumb Screw, 18-8 Type B No Shoulder, 1 ea

3/8"-16 x 1 1/2", Shoulder Thumb Screw 18.8, Type A, ea

ASCE 4-2 1/8 (.063-.125), Alum/Steel Dome Closed-End Blind Rivets, 100 ct

AACE 4-2 1/8 (.063-.125), Alum/Alum Dome Closed-End Rivets, ea

STSSCE 4-3 1/8 (.126-.187), Stainless Grooved Dome Closed-End Rivet, 25 ct

ASLF 64-66 3/16 (.188-.375), Alum/Steel Dome Multi-Grip Blind Rivets, 100 ct

ASCMG 43-45 1/8 (.125-.312), Alum/Steel Dome Multi-Grip Rivet, 100 ct

1/2"-13 x 12', F1554 Grade 36 All Thread Rod, UNC Plain

1/2"-13 x 12', F1554 Grade 36 All Thread Rod, UNC Zinc Plate

5/8"-11 x 3', F1554 Grade 36 All Thread Rod (USA), UNC HDG

1.5" Heavy Duty Double Pin Clamps

#4-40 x 5/16", Machine Screw, Flat Head Torx, 304 Stainless, T8 (FT)

#2-56 x 1/4", Machine Screw, Pan Head 6-Lobe (Torx) T8, 304 Stainless, (FT)

#0-80 x 3/16", Machine Screw, Fillister Head w/Slot, 304 Stainless, (FT)

#6-32 x 5/16", Machine Screw, Phillips Flat Head, 316 Stainless, (FT)

#4-24 x 1/2", Self-Tapping Screw, Phillips Flat Head, Stainless 316, (FT)

#4-24 x 1/2", Self-Tapping Screw, Pan Head Phillips, 316 Stainless, (FT)

1/4"-10 x 1 1/4", Hex Lag Screw, 316 Stainless Steel, 1 ct

#6-32 (.080-.130), Rivet Nut, Steel Knurled Large Flange, Y/Zinc

#10-32 (.020-.130), Rivet Nut, Stainless 304, Knurled Large Flange

M4 (.080-.130), Rivet Nut, Steel Knurled Large Flange, Y/Zinc

5/16"-18 (0.027 - 0.150"), Rivet Nut, Aluminum, Knurled Large Flange

3/8" x 4 1/8", Headed Weld Stud w/ Ferrule, 1 ct

#4-40 x 5/16", Machine Screw, Truss Head 6-Lobe (Torx) T10, 304 Stainless, (FT)

1/2 Beta Smoothie Twin Series, 1 ct

1/4" x 3/4" Step Drill Bit 9 Holes, 1 ea

1/16" x 3/16" ID x 5/16" OD Nitrile O-Ring

5/16", (3/4)TON Screw Pin Anchor Shackle, 1 ea

#1-72 x 1/4" Full Thread SHCS Fine Black 100ct

3-48 x 1/4, Full Thread SHCS Coarse Black, 100 ct

4-40 x 1/4, Full Thread SHCS Coarse Black, 100 ct

5-40 x 1/4, Full Thread SHCS Coarse Black, 100 ct

6-32 x 1/4, Full Thread SHCS Coarse Black, 100 ct

8-32 x 1/4, Full Thread SHCS Coarse Black, 100 ct

#8-36 x 1/2", Full Thread Socket Head Cap Screw Fine Black, 100ct

1/4-20 x 3/8, Full Thread SHCS Coarse Black, 100 ct

5/16"-18 x 3/8", Full Thread Socket Head Cap Screw Coarse Black, 100ct

5/16"- 24 x 5/8", Full Thread SHCS Fine Alloy Black, 100ct

3/8"-16 x 5/8", Full Thread SHCS Coarse Black, 100ct

3/8"-24 x 3/4", Full Thread SHCS Fine Black, 50ct

7/16"-14 x 3/4", Full Thread SHCS Coarse Black

1/2"-13 x 5/8", (FT) Socket Head Cap Screw Plain Coarse

5/8"-18 x 1 1/2", Full Thread SHCS Fine Black, 5 ct

3/4"-10 x 1 1/4, Full Thread SHCS Coarse Black, 1 ea

1"-8 x 2", Full Thread SHCS Coarse Black, 1 ct

1 1/4-7 x 2 1/2, Full Thread SHCS Coarse Black, 1ct

1 1/2-6 x 3, Full Thread SHCS Coarse Black, 1 ct

0-80 x 1/4", SHCS Stainless Steel A2 Fine 18.8, 1 ea

#6, Hi-Collar Split Lock Washer, Med. Carbon, Plain

#4-40 x 3/8", Socket Head Cap Screw, 316 Stainless, (FT)

#4-40 x 1/4", Full Thread Socket Head Cap Coarse Nylon Patch, 100 ct

8-32 x 1/2", Low Head Socket Cap Coarse, Black

3/8 X 7/16 Dropped Forged Carbon Steel (1 Ton), 1 ct

5/16 x 3/8 Drop-Forged Carbon Steel (3/4 Ton), 1 ct

3/8 x 7/16 Drop-Forged Carbon Steel (1 Ton), 1 ct

3/8 Square Head Shackle, 1 ct

1-1/8 HDG Shackle (8,000 Pound), 1 ct

3/8 x7/16 Drop-Forged Carbon Steel (1 TON) 1 ct

1/4 x 5/16 Galv. Shackle (667 Pound), 1 ct

SBS 4-4L 1/8 (.188-.250)x0.375, Steel/Steel Large Dome Head Rivet, 100 ct

ABA 4-4L 1/8 (.188-.250)x0.375 ALUM/ALUM Large Dome Head Rivet, ea

ABS 4-4L 1/8 (.188-.250)x0.375 Alum/Steel Large Dome Head Rivet, 100 ct

SSBSS 4-4L 1/8 (.188-.250)x0.375, , Stainless Large Dome Head Rivet, 50 ct

#6-20 x 3/4", Self-Drilling Screw, Indent HWH Unslot, Stainless 410, #2 Pt. BSD (FT)

#6-20 x 5/8", Self-Drilling Screw, Pan Head Phillips, Stainless 410, #2 Pt. BSD (FT)

#6-20 x 3/4", Self-Drilling Screw, Flat Head Phillips, Stainless 410, #2 Pt. BSD (FT)

#6-20 x 3/4", Self-Drilling Screw, Pan Head Square Drive, Stainless 410, #2 Pt. BSD (FT)

3/8" x 5" TAPKING™ HD Concrete Screw Anchor, Zinc/P, 1 ea

10-32, Serrated Flange Lock Nut 18.8 304 Stainless, 100 ct

Battery Cable, 2 ga Black, 25ft

3/8"-16 x W1/2" x L1 1/8", Hex Coupling Nut 18-8 Stainless Steel, 1 ea

Battery Terminal Top Post Straight - 4 GA Negative

Battery Terminal Top Post (Flag) - 2/0 Positive

Battery Terminal Top Post Right Elbow - 2/0 Positive

8 gauge 5/16" Stud Size, Lugs -Copper/Tin

5/64, Magnum Super Premium Drill Bit

5/16"-24xW7/16"xL1" Hex Coupling Nuts 316 Stainess Steel

#4-40 x 1/2", Button Head Socket Cap Screw, 316 Stainless (FT)

#4-40 x 3/8", Flat Socket Head Cap Screw, Stainless 316 (FT)

#6-9 x 1", Drywall Screw, Bugle Head Phillips, Coarse, Bk. Phosphate

9/16" x 1/2" Shank, Norseman Spiral Flute Reamer, 1 ea

62 Piece UNC/ UNF/ Metric Tap And Die Set

3/4", Durasquirt™, DTI Washer, Mechanical Galvanized for A325

5/64, Cobalt Heavy Duty Drill Bit M42, 135 Degree

5/16"-18, Grade G Flange Top Lock Nut, Plain UNC (Coarse)

SCS 4-4 1/8 (.188-.250)x0.375, Steel/Steel Countersunk Blind Rivet, 100 ct

1/4" SAE 45 degree Flare Short Rod Nut, 1 ct

22-18 Ga. Non-Insulated #8 Ring Terminal, 1 ea

3/8" SAE 45 degree Flared Plug, 1 ct

5/16" SAE 45 degree Flared Cap, ea

5/16" SAE 45 degree Flare Copper Gasket, 1 ct

5/16" SAE 45 degree Flare Copper Bonnet, 1 ct

3/16" (3.4 - 5 MM) Oetiker Hose Clamp, 2-Ear Zinc Plate, 1 ea

1/4", SAE 45 degree Flare Union, ea

4-40 x 1/4 Cup Point Set Screw UNC

6-40 x 5/16" Set Screw Cup Point Fine Plain

3/8" x 5/16" SAE 45 degree Flare Reducing Union, ea

1/4", SAE 45 degree Flare Union Tee, ea

1/2" x 3/8" x 1/2" SAE 45 degree Flare Reducing Tee, ea

#0-80 x 1/8" Socket Set Screw Cup Point Fine 18-8 100 ct

1/4 x 1/4 Male SAE 45 degree Flare x MIP Branch Tee, 1 ct

1/4 x 1/4 Male SAE 45 degree Flare x Female IP Adapter 1 ct

1/4 x 1/8 Male SAE 45 degree Flare x Male IP Adapter 1 ct

1/4" Male SAE 45 degree Flare x 1/8" Male IP 90 degree Elbow, ea

12-10 Non-Insulated Butt Connector 25 ct

1/4 x 3/8 Male SAE 45 degree Flare x Female IP Elbow 90 degree 1 ct

1/4 x 1/4 Male IP x 45 degree Flare Male Run Tee 1 ct

1/4 Male SAE 45 degree Flare Forged Elbow 90 degree 1 ct

4-40 x 1/4 Socket Set Screw Cup Point 316 Coarse 100 ct

5/8 x 1/2 Male SAE 45 degree Flare Forged Reducing Elbow 1 ct

3/8 x 3/8 Male SAE 45 degree Flare x Female IP Branch Tee 1 ct

5/16" Male SAE 45 degree Flare x 1/8" Male IP 45 degree Elbow, ea

3/8 SAE 45 degree Flare Forged Female Swivel 1 ct

Electrical Tape 3/4 x 60 ft x 7 mil-Green

#1-72 x 1/4", Socket Set Screw, Knurled Cup Point, Fine, Black Oxide

Wire Eye Lag, 1/4" x 3 3/4" OAL, Zinc Plated, ea

8" Nylon Cable Tie-50 lb-Black, 1000 ct

9/16-18 x 1 5/8, Track Shoe Bolts Plain 170M PSI, 1 ea

1/2"-20, Track Shoe Nut Plain Finish Square 170M PSI, 1 ea

Screw Mount Cable Ties 8" (50lbs), 100 ct

1 1/4"-7 Flex Lock Nut, Full Height, CAD/WAX

Disc-Lock Washer, Glued Pair, 10MM (3/8"), Zinc Flake

Drill Dispenser, Letter Drills A to Z

#4-40 x 3/32", Socket Set Screw, Oval Point, Coarse, Black Oxide

10 ml, 131 High Strength Vibratite Threadlocker

ACA 4-4 1/8 (.188-.250)x0.375, Alum/Alum Countersunk Blind Rivet, 1 ct

ACS 4-4 1/8 (.188-.250)x0.375, Alum/ Steel Countersunk Blind Rivet, 1 ct

SSCSS 4-4 1/8 (.188-.250)x0.375, Stainless Steel Countersunk Rivet, 50 ct

1/4"-20 x 3/4", Grade 8 Carriage Bolt Zinc Yellow, ea

1404 Male Pipe x Female Pipe Swivel, 1ct

Female Pipe x Female Pipe Adapter, 1ct

Male Pipe x Female Pipe Swivel 90 Adapter, 1 ct

Male Pipe x Female Pipe Swivel 45 Degree Adapter, 1 ct

1/4" Dia.x 1" Pilot Pin for 1/2" to 11/16 Carbide Tipped Cutters

1/2" X 1", Deep Cut Carbide Tipped Annular Cutter

1/4''-20 x 3-1/4'' Ultrawedge™+ Concrete Anchors, Zinc Plate, ea

Pro Lock 50 ft 12/3 Extension Cord, Green

1/2''-13 x 3-3/4'', Ultrawedge™ Concrete Anchors, HD Galvanized, 1 ea

1/8"-27 PTF x 1-3/16" OAL 90˚ Grease Fitting, 1 ea

5/16" x 0.55 OAL Straight Drive Grease Fitting, 1 ea

Large, Ironwear Hooded Coveralls

1/4"-18 NPT x 0.95 OAL 45˚ Degree Stainless Grease Fitting, ea

M5-0.80 x 16 MM, (FT) Hex Cap Screw, 10.9 Coarse, DIN 933 / ISO 4017, Y/Zinc, 1 ea

M6-1.00 x 40 MM, (PT) Hex Cap Screw, 10.9 Coarse, DIN 931 / ISO 4014, Y/Zinc, 1 ea

1/4"-20 x 2", Turned Eye Bolt No Nut Z/P, ea

SA-43, 1/8" x 9/16" x 1/8 Cylinder Shape-No End Cut-Double Cut

1/8"-27 NPTF x 0.62 OAL Straight Thread Forming Grease Fitting, 1 ea

SA-5L6, 1/2" x 1" x 1/4 Cylinder Shape-No End Cut-6" Shank

SA-5NF, 1/2" x 1" x 1/4 Cylinder Shape-No End Cut-Aluma Cut

3/4"-10, A563 Heavy Hex Nut, Grade DH (USA) Plain, ea

SB-43, 1/8" x 9/16" x 1/8 Cylinder Shape-End Cut

SC-11, 1/8" x 1/2" x 1/4 Cylinder Shape-Radius End-Double Cut

1/4 Brass Sleeve Ferrules Compression 50 ct

7/8", DTI Washer, Mechanical Galvanized for A325

SD-11, 1/8" x 1/8" x 1/4 Ball Shape

3/8 Delrin Sleeve Ferrules Compression 25 ct

1/4 Brass Nuts Compression 25 ct

1/2 Brass Cap Compression 10 ct

1/4 x 1/8 Union Compression 10 ct

1/2 Bulkhead Union Compression 1 ct

1/4" Tee Compression, ea

3/8", Union Elbow Compression, 1 ea

3/16 x 1/4 Female Adapter Compression 5 ct

3/16" x 1/8", Compression x Male Adapter, ea

3/16 x 1/4 Male Elbow Compression

1/4 x 1/8 Female Elbow Compression 5 ct

1/4 x 1/8 Male Run Tee Compression 1 ct

1/4 x 1/8 Male Branch Tee Compression 1 ct

SBS 4-4 1/8 .188-.250x0.375/Steel Dome Head Blind Rivet 500 ct

ABA 4-4 1/8 .188-.250 x 0.375 Dome Head Blind Rivet, 1 ct

1/8 .188-.250 x 0.375 AL5056 / Dome Head Blind Rivet, 1 ct

SSBSS 4-3 1/8" (.126-.187) x 0.313 SS 304 Dome Head Blind Rivet, 1 ct

5/16 x 3/8 Stainless Steel Shackle (1,500 Pound), 1 ct

5/16 x 3/8 Stainless Steel Shackle (1,500 Pound), 1 ct

5/16 x 5/16 Stainless Steel Shackle (1,200 Pound), 1 ct

#194 Miniature Bulb, Glass Wedge Base

5/16 x 3/8 Stainless Steel Shackle (1,300 Pound), 1 ct

5/16 x 5/16 Stainless Steel Shackle (1,300 Pound), 1 ct

U-Bolts, Round Bend HDG 5/8-11 x 9-1/2" X 6-3/4, 1 ea

1/4"-28 PTF x 0.54 OAL Straight Stainless Grease Fitting, ea

1/4"-28 PTF x 0.82 OAL 45˚ Degree Stainless Grease Fitting, 1 ea

5/32 x 5-1/2" High-Performance Masonry Drill 12 ct

3/8", Bore Single Split Shaft Collar Aluminum, 1 ct

5mm, Bore Single Split Shaft Collar Black Oxide, 1 ct

8mm, Bore Single Split Shaft Collar Stainless Steel, 1 ct

1/4", Bore Single Split Shaft Collar Black Oxide Steel, ea

1/4", Bore Single Split Shaft Collar Zinc Plated Steel, ea

1/4", Bore Single Split Shaft Collar Stainless Steel, ea

5/16"-18, Threaded Bore Split Shaft Collar Black Oxide Steel, 1 ct

5/16"-18, Threaded Bore Split Shaft Collar Stainless Steel, 1 ct

3/8 Stainless Steel Shackle (2,000 Pound), 1 ct

5/16" Polypropylene Tube Union, 316 Stainless, Straight

1/4 X 1/4, Push-to-Connect Union, Nickel Plated

E-Z Coil™ Threaded Insert For Metal - #2-56 x 2D

1/8" Push-In x 1/4" Male NPTF Male Adapter

1/4" Push-to-Connect Union Tee, Nickel Plated

Right Cut Proferred Aviation Snips

1/8" Tube x #10-32 Male Push-In Brass Connector, 1 ct

5/32" Tube x 1/8" MIP Push-In Brass 90° Elbow

5/32" Push-In x 10/32" Male NPTF 90 Degree Swivel Elbow

1/4" Push-In x 3/8" Male NPTF 90 Degree Swivel Elbow, 316

0-80 X 1/4 Button Head Socket Cap Screw Plain Fine

2-56 X 1/4", Button Head Socket Cap Screw Plain Coarse, 100 ea

1/8" Push-In x 1/4" Male NPTF Swivel Branch Tee

3/8" Plastic Push-In Bulkhead Union

Portaband Saw Blade COMPACT 10TPI 35-3/8, 3 ea

1/4" Push-In Union Elbow, Nickel Plated

5/16" Push-In Union Elbow, Stainless Steel

16-14 Blue Heat Shrink Butt Connector, ea

12-10, Yellow Nylon Butt Connectors

1/2"-13 x 4", Plow Bolt, Grade 8, #3 Flat Head, Plain (FT)

3/8" Push-In In-Line Needle Valve

4-40x1/2 Full Thread Button Course Nylon Patch Black 100 ct

24-20, Wire Nuts-Orange, 100 ea

1/2 x 5/8 Stainless Steel Shackle (4,000 Pound), 1 ct

18-14 White Instant Tap Connector- No Wire Stop

12-10 Nylon Pigtail, 100 ct

6mm Tube OD Push-In Tee (Composite) Metric, 1 ct

6MM Push-In x 1/8" Male NPTF Male Adapter

6MM Push-In x 1/8" Male NPTF 90 Degree Swivel Elbow

5mm Tube x 1/8" NPT Male, Metric Tube Adapter, 1 ct

#8-10 (1/4" x 5/8" Grip) Tri-Fold Rivet w/Sealing Washer, Alum-Alum, 100 ea

5mm Tube x 1/8" Male NPT Metric Swivel 90° Elbow, 1 ea

5MM Push-In Union Connector Nickel Plated, 1 ea

8MM Push-to-Connect Union, Nickel Plated

3/8" Tube Y Union, Push To Connect, ea

3/8" Push-In x 1/4" Male Elbow Flow Control Valve

0-80 X 1/4 Flat Socket Cap Screw Plain Fine

8MM x 1.25 Straight Grease Fitting

8MM x 1.25 Grease Fitting 90 degree

4-40 x 5/8 Full Thread Coarse Nylon Patch Black 100ct

1/4"-20 x 1 1/4", Grade 8 Carriage Bolt, Plain Finish, 1 ea

1/4 Brass Insert Sleeve Compression, 25 ct

9/16 4 Flute Core Drill 3 Flats 1/2 Shank Hole Hog 1 ct

1/4"-10-24 x 5/8", Socket Shoulder Screw, UNC, Black Oxide

3/32", VORTEX-Point Mechanic Length Drill, 3 Flats Shank

3/32", Magnum Super Premium Drill Bit

3/8"-16 Square Nuts Grade 2 Plain, ea

3/8"-16 x 1-1/2" Thumb Screw No Shoulder Type P Z/P, ea

# 12 Hose Clamp Lined 304SS, 7/8" to 1 1/4", 1 ea

3/8"-16, Square Nuts Grade 2 Zinc Plated, 100 ea

3/8"-16 Square Nuts Grade 2 Hot Dipped Galvanized

6 External Tooth Lockwasher Z/P 100 ct

6 Internal Tooth Lockwasher Z/P 100 ct

Male Jic X Male Jic Adapter,1 ct

Male JIC X Male Pipe Adapter, 1 ct

Female JIC X Male JIC Reducer Adapter, 1 ct

1/4" JIC Flared Plug, 37 degree Steel , Zinc-Trivalent

1/16" x 5/16", Dowel Pin, Thru-Hardened Alloy, 50-62 HRC

1/32" x 5/16", Dowel Pin, 304 Stainless

3/8 Grade 43 Clevis Grab Hook, 1 ct

3/8 Grade 43 Clevis Slip Hook, 1 ct

3/8 Grade 43 Clevis Slip Hook, 1 ct

3/8 Grade 70 Clevis Slip Hook

3/8 Grade 80 Alloy Grab Hook, 1 ct

3/8 Grade 80 Alloy Clevis Sling Hook, 1 ct

1/16" x 3/4", Cotter Pin, 304 (18-8) Stainless Steel

Kendall L-427 Super Blue 14 OZ Tubes 10 ct

M8 DIN 125A Flat Washer 200 HV Zinc Yellow 100 ct

M6, Din 7349 Thick Flat Washer, 50 ct

1/4", Wire Rope Clips HD Galvanized, 1 ct

1/4" x 400' Pail Grade 43 Hot Dipped Galvanized Chain Only, 1 ea

M8 DIN 125A Flat Washer 200 HV Plain, 100 ea

M6 DIN 125A Flat Washer 200 HV Zinc Plated 100 ct

Male JIC X Male JIC 90 Degree Adapter, 1 ct

M5, Flat Washer, General Purpose, (DIN 125A, 140 HV) Y/Z

2501 Male JIC x Male Pipe 90 Degree, 1 ea

Male JIC X Female Pipe 90 Degree Adapter, 1 ct

Male JIC X Male Pipe 45 Degree Adapter, 1 ct

3/4", F436 Structural Flat Washer F436 HDG USA, 1 ct

1/16" x 1", Cotter Pin, Extended Prong, Square Cut, Z/P

Male JIC X Male JIC X Male JIC Adapter, 1 ct

Male JIC X Male Pipe X Male JIC Adapter, 1 ct

Male JIC X female Pipe X Male JIC Adapter, 1 ct

10-24 Toggle Wing Z/P 100 ct

3/8" Expansion Shield Anchor Double Zinc Alloy, 1 ea

3/8" Expansion Shield Anchor Single Zinc Alloy 10 ct

Male JIC Cross Adapter, 1 ct

1/4" x 1 1/2", Hammer Drive Anchor Mushroom Head Zinc Alloy With 304 SS, 10 ea

1/4 x 1", Drive Mushroom Head Z/P with Z/P Nails, 50 ea

1/8" Lx1 3/4" Pan Phillips Combo Hollow Wall Anchor Z/P 50 ct

3/8" Drop In Anchor Zinc Plated with Tool, 50 ct

3/8" Drop-In Anchor Setting Tool Zinc Plated 1 ct

Male JIC X Male JIC Bulkhead Adapter, 1 ct

1/8"x 1 1/2" L Pan Phillips Combo Hollow Wall Anchor Drive Type Z/P 50 ct

5/16" x 1 3/4" Lag Screw Expansion Sheid Anchor Long Zinc Alloy 25 ct

#10-24 Machine Screw Anchor Zinc Alloy Cone Lead Sleeve 25 ct

1/4x2 1/4 Sleeve Anchor Acorn Nut Z/P 100 ct

1/4 x 3 Sleeve Anchor Flat Head Phillips / Slotted Combo Z/P 50 ct

3/8 x 1 7/8", Sleeve Anchor Hex Nut Z/P, 1 ea

1/4"-20 x 3-1/4", Concrete Wedge Anchors Zinc Plated

3/8 NPTF 90 degree Female Pipe Elbow 5 ct

#6-8 x 1 1/2" Wood Screw Anchor Lead Alloy Plain 50 ct

3/8 NPTF 45 degree Female Pipe Elbow 1 ct

1/4" NPTF Extruded Brass Union Tee

3/8 NPTF Female Pipe Cross Fitting 1 ct

3/8 NPTF Female Pipe Coupling, 1 ct

3/8 NPTF Brass Union 1 ct

3/8 NPTF Brass Pipe Cap 5 ct

3/8 NPTF Brass Square Head Plug 1 ct

3/8" NPTF Countersunk Hex Head Plug, each

3/8" Male x 1/4" Female NPTF Brass Hex Bushing, ea

3/8 Male x 1/4 Female NPTF Brass Face Bushing 1 ct

3/8 Jam Lock Nut 1ct

3/8 NPTF Brass Close Pipe Nipple, 1 ea

1/8 X 2-1/2 Long Brass Nipple 1ct

3/8 NPTF 90 degree Street Elbow Extruded 1 ct

3/8 x 1/4 Reducer Coupling 5ct

1/4 x 1/4 F x M Extender Adapter 1ct

1/4", NPTF Cored Hex Plug, 1 ea

1/4", NPTF Hex Nipple, ea

3/8 X 1/4 NPTF Reducing Hex Nipple 1ct

3/8 Brass 45 degree Street Elbow 1ct

3/8 NPTF Brass Street Tee, 1 ea

3/8 90 degree Male Pipe Elbow 1ct

3/8 Male Branch Tee, 1 ct

1/4"-18 FNPT x 3/4"-16 UNS x 15/16"L Brass Bulkhead Anchor, 1 ct

1/2"-14 MNPT x 1"-14 UNS x 1/4" -18 FNPT, 2.94"L Steel Coupling, 1 ct

3/8"-18 FNPT x 1"-14 UNS x 1/2"-14 MNPT, 1 29/32"L Brass Bulkhead Anchor, 1 ct

1/2" Body x 1/2" FIP Auto Steel Coupler, ea

1/4" Plug x 1/4" Industrial Interchange SS Male Pipe Thread

5/16"-18, Slotted Finished Hex Nuts Plain, 1 ea

1/4"-20 x 2", Elevator Bolt, Flat Fanged Head, 304 Stainless (FT)

7/16-20 x 3/8 Male JIC 37degree Flare x Male IP Straight 1 ct

5/16"-18, Slotted Finished Hex Nuts Coarse Zinc Plated, 1 ea

1/2-20 x 1/4 Male JIC 37degree Flare x Male IP Forged Elbow 45 degree 1 ct

3/4-16 x 1/2 Female JIC 37degree Flare x Male IP Straight Swivel Adapter 1 ct

1/2-20 x 1/4 Male JIC 37degree Flare x Male IP Elbow 90 degree 1 ct

1-1/2 Milwaukee ICE Hardened BI-Metal Hole Saw, 1 ct

9/16-18 x 1/4 Male JIC 37degree Flare x Female IP Straight Adapter 1 ct

3/4-16 JIC 37degree Flare Straight Tube Union 1 ct

9/16-18 x 1/4 Male JIC 37degree Flare x Female IP 90 degree Elbow 1 ct

3 x 1-15/16 x 1/4 Square Recess Power Bits 10 ct

4-40 x 1/2 Full Thread Button Coarse Nylon Pellet Black 100 ct

3/4"-10, HEX NUTS A194 / SA 194 2H HEAVY HDG & WAX (USA)

4-40 x 1/2 Full Thread Flat Coarse Nylon Pellet Black 100 ct

7/8"-9 Hex Nuts A194 / SA 194 2H Heavy Plain USA, 1 ct

35/64", 1/2" Reduced Shank Magnum Drill Bit, ea

5/8" x 2 1/2" x 0.25, Square Plate Washer Plain, 1 ct

5/8" x 2" x 0.125, Square Plate Washer HDG, 1 ct

3/4", Bore Double Split Shaft Collar Aluminum, 1 ct

3/4", Bore Double Split Coupling Black Oxide Steel, 1 ct

3/4", Bore Double Split Coupling Stainless Steel, 1 ct

5mm, Bore Double Split Shaft Collar Black Oxide, 1 ct

8mm, Bore Double Split Shaft Collar Stainless Steel, 1 ct

1/2", Bore Double Split Shaft Collar Nylon, 1 ct

1/4", Bore Double Split Shaft Collar Black Oxide Steel, ea

1/4", Bore Double Split Shaft Collar Stainless Steel, 1 ct

M6-1.00, Hex Nuts Class 10 DIN 934 Plain, 100 ea

1-1/4" x 6" Percussion Core Drills Spiral Flute 1 ct

22-18 #8 Red Nylon 3-Piece Ring Terminal, 25 ct

22-18, #8 Nylon 3-pc Snap Spade Terminals, ea

#10-24, Acorn Nut, 2 Piece Nickel Plated, UNC

10-24 x 5/16" 3 Prong Tee Nuts Z/P, ea

1/4" Hose x 3/8" Male NPTF Male Adapter, 1 ct

5/16 Hose x 1/4 Female NPTF Rigid Female Adapter 1 ct

5/16" Hose x 5/16" Female 45/37degree SAE/JIC Female Swivel, ea

5/16 Hose x 5/16 Male Flare Male SAE Flare Adapter 1 ct

1/4 Hose x 3/8 Female Flare 45 degree SAE Flare Female Swivel 1 ct

3/8 Hose x 3/8 Female JIC Female 37degree JIC Flare Swivel 1 ct

1/4 Hose x 5/16 Male INV Flare Inverted Flare Male Swivel 1 ct

5/16 Hose x 5/16 OD Tube Rigid Tube Adapter 1 ct

3/8, Brass Push On Hose Barb, Hose Splicer, 1 ea

1/4-20 x W7/16 x L1 3/4, Hex Coupling Nuts A563 Grade A Z/P, 1 ct

1/4" Push On Hose Barb x 5/16" Female Inverted Flare Adapter, 1 ea

3/8" Hose x 3/8" Gasket Swivel Female Swivel, 1 ea

5/16" Hose x 1/8 Male NPTF Male Elbow, 1 ct

JIC Cap Adapter, 1 ct

3/8" Push On Hose Barb x 1/8" MIP Swivel Adapter, 1 ea

10-24 NM GR2 Nylon Insert Locknuts Coarse Z/P, ea

10-32 NM Standard GR2 Nylon Insert Locknuts Fine Z/P

#5-40, UNC NTM (THIN) Nylon Insert Locknut Grade N2 (A) Low Carbon Z/P

#6-40, UNF NTM (THIN) Nylon Insert Locknut Grade N2 (A) Low Carbon Z/P

5/16"-18, Finished Hex Nuts Grade 8 Coarse Y/Z, ea

5/16"-18, Hex Nuts Grade 8 Coarse Thread

6-32 NM Nylon Insert Locknut Coarse Stainless A2 18-8

8-36 NM Nylon Insert Locknuts Fine Stainless A2 18-8, 1 ea

#4-40, Nylon Insert Locknut, NTM (Thin) Coarse, 304 Stainless

#6-32 NM Nylon Insert Locknuts Coarse SS A4 316, 1 ea

6-40 NM Nylon Insert Locknuts Fine Stainless A4 316, 1 ea

M8-1.25 Nylon Insert Locknut Class 10 Coarse DIN 985 Z/P, 1 ea

M10-1.25, Nylon Insert Locknuts Class 10 Fine DIN 985 Z/P, 1 ea

9/16"-12, Heavy Hex Nut, A194 / SA 194 2H, HD Galvanized Coarse, 1 ea

1/4" OD x 100', Polyethylene Tubing (LLDPE), Natural

5/16"-18, 2H Heavy Hex Nuts Coarse Plain

M5-0.80 Coarse Metric Hex Nut, DIN 934, Class 10 Z/P, 100 ea

5/16-18 Hex Nuts Coarse Carbon 100 ct

3/8"-16 Heavy Hex Nuts A563 Grade A Coarse, 1 ct

5/16-18 Hex Nuts Coarse Z/P 100 ct

3/16" Hose x 1/8" MIP Rigid Male Adapter, ea

3/8-16 Gr2 Heavy Hex Nuts Coarse Z/P 100 ct

1/4 Coupler x 3/8 Female Pipe Thread, 1 ct

1/4 NPSM Thread x 1/4 MIP Ballseat Male Adapter 10 ct

5/16 Hose x 1/8 Male NPTF Forged Hose Barb 90 degree Elbow

1/4 Hose x 1/8 FIP Rigid Female Adapter 10 ct

3/8 Hose x 1/4 FIP Hose Barb To Ball End Swivel 10 ct

1/4" x 1/8 Reducing Hose Mender/Splicer, ea

1/4 Hose x 3/8 45 degree Flare Adapter 1 ct

1/4 Hose x 1/4 Female 45 degree Flare Swivel 1 ct

3/8 Hose x 1/8 MIP 45 degree Elbow Hose Barb To MIP 1 ct

3/8-16 Hex Nut Coarse Hot Dipped Galvanized 100 ct

1/4" x 1/8", Reducer Brass Hose Barb Tee, ea

3/8 Hose x 1/8 FIP 90 degree Female Hose Barb Elbow 1 ct

3/8"-16, Heavy Hex Nuts A563 Grade A Coarse Hot Dipped Galvanized, 1 ea

3/8 Hose x 1/8 Hose 90 degree Hose Barb Elbow 1 ct

#6-32 x 5/16" x 7/64" Hex Machine Screw Nut Z/P, 1 ea

7/8"-9 Hex Nuts Jam Coarse Thread Low Carbon Hot Dipped Galvanized

E-Z LOK Threaded Insert for Metal - Standard Wall - Carbon Steel- 5/16-18 x 1/2-13

1/4" Push On Hose Barb x 3/8" Male JIC Flare Adapter, 1 ea

5/16"-18 Hex Nuts Jam Coarse Z/P

1/4 x 4" OAL (2-1/2" Depth) Impact Hammer Drills

5/8"-11, J995 Gr 5 Hex Nut Left Hand Zinc Yellow, ea

1 1/4"-7, Heavy Hex Nut, Left Hand, Plain Finish

5/8-18, Grade 5 Hex Jam Nut Left Hand Yellow Zinc

3/4-10 ASTM A563 Structural Hex Nut Plain Coarse 25 ct

E-Z LOK Threaded Insert for Metal - Extra Heavy Wall - Carbon Steel - 3/8-16 x 5/8-11

3/4-10 A563 Hex Nut Grade DH Coarse HDG/WAX/BLUE 25 ct

8-32-2B, Cage Nuts Zinc Plated, ea

3/8", Grade 8 Split Lock Washer Yellow Zinc

5/16-18 Grade 8 Hex Jam Nut Yellow Zinc Plated

5/16"-24 Hex Nuts Jam Coarse Zinc Yellow, 1 ct

3/8", Heavy Split Lock Washer Carbon Thru-Hardened, 25 ct

1 5/8"-5 1/2, A194 2H Heavy Jam Nut Plain Finish

5/16", Flat Washer, USS Low Carbon, Plain

5/16", Flat Washer, USS Low Carbon, Zinc Plate

3/8", Flat Washer, Low Carbon, USS Hot Dipped Galvanized