#16-14 (1/4") Nylon Insulated Female Quick Connector, 25 ct

16-14 (1/4) Nylon Insulated Male Quick Connector 25 ct

16-14(1/4) Nylon Fully Insulated Male Quick Connector 25 ct

16-14 (1/4) Nylon Fully Insulated Female Quick Connector 25 ct

12-10 (1/4) Nylon Insulated Male Quick Connector 25 ct

12-10 (1/4) Nylon Insulated Female Quick Connector 25 ct

22-18 (110) Nylon Insulated Female Quick Connector 25 ct

22-18 (3/16) Nylon Insulated Female Quick Connector 25 ct

16-14 (110) Nylon Insulated Female Quick Connector 25 ct

16-14 (3/16) Nylon Insulated Female Quick Conector 25 ct

22-18 (3/16) Nylon Insulated Male Quick Connector 25 ct

16-14 (3/16) Nylon Insulated Male Quick Conector 25 ct

12-10 (1/4) Nylon Fully Insulated Female Quick Connector 25 ct

1/4" Hose x 1/8" Male NPTF Male Adapter, 1 ct

6-32 x 1/4" 3 Prong Tee Nuts Z/P, ea

1/4 Hose x 1/8 Female NPTF Rigid Female Adapter 1 ct

1/4" Hose x 1/4" Female 45/37degree SAE/JIC Female Swivel, ea

1/4 Hose x 1/4 Male Flare Male SAE Flare Adapter 1 ct

1/4 Hose x 1/4 Female Flare 45 degree SAE Flare Female Swivel, 1 ea

1/4 Hose x 1/4 Female JIC Female 37degree JIC Flare Swivel 1 ct

1/4 Hose x 3/16 Male INV Flare Inverted Flare Male Swivel 1 ct

1/4 Hose x 1/4 OD Tube Rigid Tube Adapter 5 ct

1/4, Brass Push On Hose Barb, Hose Splicer, 1 ea

10-24 x W5/16 x L3/4, Hex Coupling Nuts A563 Grade A Z/P, 1 ct

1/4" Push On Hose Barb x 3/16" Female Inverted Flare Adapter, 1 ea

1/4" Hose x 1/4" Gasket Swivel Female Swivel, 1 ea

1/4", Hose x 1/8 Male NPTF Male Elbow, 1 ct

JIC Cap Adapter, 1 ct

1/4" Push On Hose Barb x 1/8" MIP Swivel Adapter, 1 ea

6-32 NM GR2 Nylon Insert Locknuts Coarse Z/P, ea

6-40 NM Standard GR2 Nylon Insert Locknuts Fine Z/P, 1 ea

1/4"-20, Finished Hex Nuts Grade 8 Coarse Y/Z, ea

22-18 Insulated Piggyback 25 ct

16-14 (1/4) Insulated Piggyback 25 ct

1/4"-20, Hex Nuts Grade 8 Coarse Thread

4-40 NM Nylon Insert Locknut Coarse Stainless A2 18-8, 1 ea

4-48 NM Nylon Insert Locknuts Fine Stainless A2 18-8, 1 ea

4-40 NTM Thin Nylon Insert Locknuts Stain Coarse 18.8, ea

#4-40 NM Nylon Insert Locknuts Coarse SS A4 316, 1 ea

4-48 NM Nylon Insert Locknuts Fine Stainless A4 316, 1 ea

M5-0.80 Nylon Insert Locknut Class 10 Coarse DIN 985 Zinc Plated, 1 ea

M8-1.00, Nylon Insert Locknuts Class 10 Extra-Fine DIN 985 Z/P, 1 ea

3/8"-16, Heavy Hex Nut, A194 / SA 194 2H, HD Galvanized Coarse, 1 ea

3/8 Hose X 3/8 MPT Air Brake Hose Repair Kit, 1 ct

1/4"-20, 2H Heavy Hex Nuts Coarse Plain, ea

M3-0.50 Coarse Metric Hex Nut, DIN 934, Class 10 Z/P, 100 ea

1/4-20 Hex Nuts Coarse Carbon 100 ct

1/4"-20, Heavy Hex Nuts A563 Grade A Coarse, 1 ct

1/4-20 Hex Nuts Coarse Z/P 100 ct

1/8" Hose x 1/8" MIP Rigid Male Adapter, ea

1/4-20 Gr2 Heavy Hex Nuts Coarse Z/P 100 ct

1/4 Hose x 1/8 Male NPTF Forged Hose Barb 90 degree Elbow, ea

1/8 Hose x 1/8 FIP Rigid Female Adapter 10 ct

1/4 Hose x 1/4 FIP Hose Barb To Ball End Swivel 10 ct

1/8", Hose Mender/Splicer, ea

1/4 Hose x 1/8 MIP 45 degree Elbow Hose Barb To MIP 1 ct

5/32" x 4 1/4", (2" Usable Length) SDS-PLUS Carbide Bit, 1 ea

22-18 (110) Nylon Fully Insulated Female Quick Connector 25 ct

22-18 (3/16) Nylon Fully Insulated Female Quick Connector 25 ct

16-14 (3/16) Nylon Fully Insulated Female Quick Connector 25 ct

1/4-20 Hex Nut Coarse HDG 100 ct

3/16 Hose x 1/4 45 degree Flare Adapter 1 ct

3/16 Hose x 3/16 Female 45 degree Flare Swivel 1 ct

1/8 NPSM Thread x 1/8 MIP Ballseat Male Adapter 10 ct

1/8", Brass Hose Barb Tee, ea

1/4 Hose x 1/8 FIP 90 degree Female Hose Barb Elbow 1 ct

1/4"-20, Heavy Hex Nuts A563 Grade A Coarse Hot Dipped Galvanized, 1 ea

1/4 Hose x 1/8 Hose 90 degree Hose Barb Elbow 5 ct

#4-40 x 3/16" x 1/16" Hex Machine Screw Nuts Coarse Z/P 100 ct

5/8"-11 Hex Nuts Jam Coarse Thread Low Carbon Hot Dipped Galvanized 10 ct

1/4" Push On Hose Barb x 1/4" Male JIC Flare Adapter, 1 ea

1/4"-20 Hex Nuts Jam Coarse Z/P 100 ct

5/16"-24, J995 Gr 5 Hex Nut Left Hand Zinc Yellow, ea

7/8"-9, Heavy Hex Nut, Left Hand, Plain Finish

5/16-24, Grade 5 Hex Jam Nut Left Hand Yellow Zinc

1/2-13 ASTM A563 Structural Hex Nut Plain Coarse 50 ct

1/2-13 A563 Hex Nut Grade DH Coarse HDG/WAX/BLUE, 50 ea

1/4", Grade 8 Split Lock Washer Yellow Zinc

1/4-20 Grade 8 Hex Jam Nut Yellow Zinc Plated

1/4", Heavy Split Lock Washer Carbon Thru-Hardened, 25 ct

1 1/4-8, A194 2H Heavy Jam Nut Plain Finish, ea

1/4", Flat Washer USS Low Carbon Plain

1/4 Flat Washers USS Zinc Plated, 100 ea

1/4"USS Flat Washers Low Carbon HDG 100 ct

6 SAE Flat Washers Plain 100 ct

5/8-11 Grade C Nylon Insert NTE Thin Lock Nut Y/Z, 1 ea

#6, SAE Flat Washers Zinc Plated, ea

1/4", Regular Split Lock washers Plain, 100 ea

12" Quick Release Extension, 1/4"

#4, Heat Treated Lock Washer Z/P, 100 ea

5/16", Regular Split Lock Washer Hot Dipped Galvanized, 1 ea

1/4" USS Flat Washers Thru-Hardened Zinc-Yellow 100 ct

1/4 USS Flat Washers Thru-Hardened Plain U.S.A. 100 ct

(OTG110) Orange Torque Grip Glove, Medium, 100 ea

3 1/2"-4 Slotted Heavy Hex Nut, A194 Grade 2H, Plain, ea

1/4'', Grade 8 USS Flat Washer Zinc Plated Yellow, 1 ea

1/2"-13, 43M PSI Slotted Hex Jam Nut Plain Finish, 1 ea

1/4", USS Flat Washers Thru-Hardened Plain, 1 ea

1/4'' x 5/8'', ASTM F436 Structural Flat Washer Plain, 1 ea

1/4'' X 5/8'', F436 Structural Flat Washer Hot Dipped Galvanized, 1 ea

3/16" X 3/4", Fender Washers Z/P, ea

#10 x 15/16 x .108 Fender Washer Extra Heavy, 100 ct

M3 Split Lock Washers Thru-Hardened Z/P-Blue

Straight Flute Solid Carbide Drill 1/16, 1 ct

5/8-11 NTU Nylon Insert Heavy Thin Nut Zinc Yellow, 1 ea

Adapter, 1/4-28 SAE-LT x 1/8-27 NPTF Zinc Plated, ea

1/4-20 GR G All Metal Hex Flange Lock Nut Zinc Yellow & Wax, ea

5/8-18 GR G All Metal Hex Flange Lock Nut Zinc Clear & Wax, ea

1/4"-20 Grade 8 Nylon Insert Flange Nut, 1 ea

M2.5, DIN 125A Flat washer 140 HV Plain, 100 ea

M1 Flat Washers Narrow Stainless A2 18-8 100 ct

M1.6 Metric Thru Hardened Flat Washer Zinc Plated, 100 ea

Trapped Barrel U-Nut 10-24, 25 ct

Round Flat Push Nut, Spring Steel, Black, 5/16" id x 5/8"od

Millitary Bolt Battery Terminal, Negative, 1 ct

T8 x 1-15/16 x 1/4" Drive Torx Power Bits, ea

1/2 Square Beveled F436 Hardened Washer Plain 10 ct

1/4", D.O.T. Air Brake Sleeve NAB, 1 ea

1/4 D.O.T. Air Brake Nut NAB 10 ct

1/2 Square Beveled F436 Hardened Washer Hot Dipped Galvanized

3/4" Square Beveled Washer 304 Stainless Steel

3/8" Nut and Spring Assembly, ea

1/4 D.O.T. Air Brake Union NAB 5 ct

1/4 D.O.T. Air Brake Bulkhead Union NAB 1 ct

1/4", D.O.T. Air Brake Tee NAB, 1 ea

1/4 D.O.T. Air Brake Elbow NAB 1 ct

1/4 x 1/8 NAB x FIP Adapter 1 ct

1/4 X 1/16 Nylon Air Brake x MIP Adapter, 1 ct

1/4 Male Elbow x 1/8 MIP, 1 ea

1/4" SAE Flat Washers Thru-Hardened Zinc Yellow 100 ct

1/4 x 1/8 Female Elbow NAB x FIP 1 ct

1/4 x 1/8 x 1/4 Male Run Tee NAB x MIP x NAB 1 ct

1/4 x 1/4 x 1/8 Male Branch Tee NAB x NAB x MPT 1 ct

1/4 x 1/8 45 Elbow NAB x MIP 1 ct

1/4 D.O.T. Air Brake Sleeve CAB 25 ct

1/4 D.O.T. Air Brake Nut CAB 10 ct

1/4 D.O.T. Air Brake Union CAB 5ct

1/4 D.O.T. Air Brake Tee CAB 1 ct

1/4 D.O.T. Air Brake Elbow CAB 1 ct

1/4 x 1/8 CAB x FIP Adapter 1 ct

1/4 SAE Flat Washers Medium Thru-Hardened Plain U.S.A. 100 ct

1/4 X 1/8 CAB x MIP Adapter 1 ct

1/4 x 1/8 Male Elbow CAB x MIP 1 ct

1/4 x 1/8 Female Elbow CAB x FIP 1 ct

1/4 x 1/8 x 1/4 Male Run Tee CAB x MIP x CAB 1 ct

1/4 x 1/4 x 1/8 Male Branch Tee CAB x CAB x MPT 1 ct

1/4 x 1/8 45 Elbow CAB x MIP 1 ct

3/8" D.O.T. Air Brake Hose Sleeve, ea

1/4'', Grade 8 SAE Flat Washer Through Hardened Yellow Zinc, ea

3/8" Air Brake Hose Nut, ea

3/8 x 1/4 Hose ID x MIP Adapter Body 1 ct

3/8 x 1/4 Hose ID x MIP Adapter 1 ct

3/8" ID Hose x 1/4 MIP Adapter w/ Spring, 1 ct

3/8, Air Brake Hose Spring, 5 ct

3/8" Hose x 3/4" Female NPT Air Brake Hose Connector, 1 ct

3/8 x 1/4 ABS Connector w/Adapter, 1 ct

3/8 x 1/4 Male ABS x MIP Adapter 1 ct

1/4" SAE Flat Washers Thru-Hardened Plain, 100 ct

1/2", F436 Structural Flat Washers Medium USA, 1 ea

12 ft Coil Set Air Brake Assembly w/ 6 Leads 1ct

1/8 Transmission Split Sleeve Collet 10 ct

Universal Aluminum Gladhand

Black Rubber Double Lip Gladhand Seal, 1 ea

Rubber Double Lip Gladhand Seal, 1 ea

1/8 Tube Transmission Sleeve Nut 10 ct

1/8" X 1/16" Transmission Male Connector, 1 ea

1/4'', Grade 8 USS Extra Thick Flat Washer Zinc Plated Yellow, 1 ea

Rubber Expandable Nut, 6/32-32, 10 ct

1/4'', Grade 8 SAE Extra Thick Flat Washer Zinc Plated Yellow, 1 ea

3/8", Black Air Brake Hose, 50ft

No. 1 Magnum Drill Bit Number, ea

1/4" DOT Nylon Air Brake Tubing, 1 FT

#8 x 3/4" x 0.05, Flat Fender Washers Stainless A2 18-8, 1 ct

6 x 3/8 x .032 Flat Washers Stainless 18.8 100 ct

3/8", Body Only, Air Brake Hose Union, 1 ea

#2x1/4"x0.020 Flat Washer SS A2 (18-8) MS15795-802 100 ct

Letter A Magnum Drill Bit 3 ct

1/4 MPT, Air Tank Drain Valve Self Sealing w/ 5 Ft Remote Cable, ea

#6x5/16"x0.032 Flat Washers StainA2 (18-8) N400 100 ct

LIME-A-WAY 28oz, 1 ct

#4 x 7/32" x 0.016, Flat Washers Stain A2 (18-8) AN960L, ea

10'' x 7/16'' x 0.038'', Flat Washers Stainless 316, 100 ea

1/4"-20 x 1 1/4", Hex Tap Bolt, UNC Stainless 316 (FT)

Sliding Drawer Cabinet Frame, 4 Drawers, 20-1/4 in W x 12-1/2 in D x 15 in H

1/4"-20 x 1/2", (FT) UNC Hex Cap Screw, Coarse Stainless 18-8, 1 ct

1/4-28 X 1/2 Hex Cap Screw 18.8 Stainless Fine 100 ct

E-Z Coil™ Threaded Insert For Metal - M2-0.4x1D

22-18, #6 Red Heat Shrink Ring, 25 ct

26-22, White Heat Shrink Butt Connector, ea

22-18 #6 Heat Shrink Spade Terminal, 25 ct

1/4"-20 x 1/2" Hex Cap Screw 316 Stainless Coarse

1/4-28 x 1/2 Hex Cap Screw 316 Stainless Fine 50 ct

6-32, Cage Nuts Zinc Plated, ea

22-18 .110 Quick Disc. Uninsulated-Female 25 ct

1/4-20 x 1/2 Full Thread Grade 2 Hex Cap Screw Coarse Plain 100 ct

1/4-28 x 5/8 Full Thread Grade 2 Hex Cap Screw Fine Plain 100 ct

22-18 (.157) Male Heat Shrink Bullet Connector, 25 ea

1/4-20 x 1/2 Full Thread Hex Cap Screw Coarse Grade 2 Z/P 100 ct

1/4-28 x 1/2 Full Thread Grade 2 Hex Cap Screw Fine Z/P 100 ct

1/4-20 x 3/4 Full Thread Flat Head Elevator Bolt Grade 2 Plain 25 ct

1/16", GoldStrike Premium Jobbers Drill Bit

1/4-20 x 3/4", Full Thread Elevator Bolt Grade 2 Zinc Plated, ea

1/4"-20 x 1", Stainless Steel Elevator Bolt

1/4-20 x 1/2", Full Thread Grade 5 Hex Serrated Flange Screw Z/P, ea

1" Clamp Metal Detect. Gasket EPDM Blue

#8-32 x 7/32", Square Head Set Screw Cup Point Coarse, 10 ct

1/4"-28 x 1 1/4", Hex Tap Bolt Full Thread, Grade 5 Zinc Plate, 1 ea

8/32 x 1/2", Six Lobe Pan Type1 Thread Cutting, ea

3/8"-16 x 1 1/4", Full Thread Grade 5 Elliptical Head Plow Bolt Z/P, ea

3/8"-16 x 6" x 1 1/4" x 1 3/4" L Shaped Anchor Bolt W/Nut/Washer Plain

3/8" x 6" x 1 1/4" x 1 3/4" L Shaped Anchor Bolt w/Nut & Washer Galvanized 1 ct

2-4 1/2 x 4 1/2", Heavy Hex Bolt A354 Grade 8 PLAIN USA, 1 ea

.028 x 5/8 Hair Pin Cotter Stainless Steel 25 ct

1/4"-20 x 1/2", Grade 8 Hex Flange Frame Bolt, 1 ea

1/2"-20 x 1", Full Thread Fine Grade 8 Indented Hex Flange Frame Bolt Black, each

1/4"-20 x 1/2", Full Thread L-9 Hex Head Cap Z/Y, 1 ct

1/4"-20, Left Hand Nut Zinc Plated, 100 each

1/4-20, L-9 Collar Lock nuts Coarse Yellow & Wax U.S.A., 25 ct

1/4-28 L-9 Collar Locknuts Fine Cad. Yel & Wax U.S.A. 100 ct

1/4", L-9 USS Tension Flat Washer ALLOY ZINC-YELLOW, 25 ct

1/4", L-9 SAE Tention Flat Washer ALLOY Zinc-Yellow (U.S.A.), 25 ct

ITM Reciprocating Blade 6TPI 6" Long (USA), ea

1/4-20 x 1/2", Full Thread Hex Cap Screw Grade 8 Coarse, ea

1/4-28 X 1/2", Hex Cap Screw Grade 8 Fine Plain, ea

1/4-20 x 1/2 Full Thread Hex Cap Screw Grade 8 Coarse USA 100 ct

1/4-28 x 1/2 Full Thread Hex Cap Screw Grade 8 Fine USA 100 ct

1/4"-20 x 1/2" Full Thread Hex Cap Screw Grade 8 Coarse Z/P, 1 ea

1/4-28 x 1/2 Full Thread Hex Cap Screw Grade 8 Fine Z/P, 1 ea

1/4"-20 x 1/2", Grade 8 UNC Hex Cap Screw, (FT) Y/Z

1/4"-20 x 1-1/4", Tap Bolt Grade 8 Coarse Yellow Zinc, 1 ea

1/4"-28 X 1/2", Hex Cap Screw Grade 8 Fine Y/Z, ea

1/4"-28 x 1 1/2", Grade 8 Tap Bolt Fine Full Thread Y/Z, ea

1/4-20 x 1/2 Full Thread Hex Cap Screws Coarse Grade 5 Plain 100 ct

1/4-28 x 1/2 Full Thread Hex Cap Screw Fine Grade 5 Plain 100 ct

1/4-20 x 1/2 Full Thread Hex Cap Grade 5 Coarse Z/P 100 ct

1/4-28 x 1/2 Full Thread Hex Cap Screw Grade 5 Fine Z/P 100 ct

1/4" x 135' Pail Grade 70 Chain Only, 1 ea

1/8 x 3" Fast Spiral Masonary Drill 12 ct

M6-1.00 x 10 MM DIN 933 Hex Cap 10.9 Coarse Z/P

M8-1.25 x 14 MM, (FT) 10.9 Hex Cap Screw, DIN 933 , Z/P

M10-1.00 x 50 MM, (FT) 10.9 Hex Cap Screw, DIN 961 Extra Fine, Z/P, 1 ea

Hose Bead X Male Boss 90 Degree Adapter, 1 ct

1/8 MIP Lever Handle Drain Cock, 1 ct

1/8 Tee Handle Internal Seat Drain Cock, 1 ct

1/8 Male Pipe Industrial Drain Cock 5 ct

1/4 x 1/8 Compression x Male Pipe Shut-Off Cocks 1 ct

M8-1.00 x 60 MM Partial Thread Hex Cap Screw 10.9 DIN 960 Fine

M6-1.00 x 16 MM Partial Thread Bolt 10.9 DIN 931 Coarse

M6-1.00 x 10 MM, Full Thread Hex Cap 10.9 DIN 933 Coarse, ea

1/8 x 2" Slow Spiral Masonry Drill 12 ct

M10-1.00 x 20 MM, Partial Thread DIN 961 Extra Fine Hex Cap Screw 10.9 Plain, 1 ea

M8-1.00 x 20MM, Full Thread Hex Cap Screw 10.9 DIN 961 Fine Plain

1/8 MIP x Bibb Brass Air Cock 1 ct

3/8" Hose Barb x 3/8" Male Pipe Thread Truck Valve, 1 ea

3/8" Female Pipe Thread x 3/8" Male Pipe Thread Truck Valve, ea

1/8" FIP x 1/8" FIP Brass Mini Ball Valve, 1 ea

1/4"-20x3/4" A307 Grade A Step Bolts Full Threaded Z/P 25 ct

10-24 x 3 1/2", Self Drilling Screw, w/Wings, 25 ct

1/2-13 x 1 1/4 A325 TYPE 1 Structural Bolt HDG USA, 1 ea

5/8"-11 x 6" 4" THD Timber Bolts A307 Grade A HDG 1 ct

1/2-13 x 1 1/2 Full Thread A307 Grade B Heavy Hex Bolt Plain Coarse 50 ct

1/4"-10x1" Hex Lag Screw Low Carbon Plain 100 ct

1/4-10 x 1",Hex Lag Screw Z/P, ea

1/4"-10 x 1", Hex Lag Screw Low Carbon HDG, 100 ea

.70 Metric Magnum Drill Bit

10-24 x 1/2", Carriage Bolt A307 Gr A Coarse Z/P, 100 each

1/4"-20 x 3/4", Carriage Bolt A307 Coarse HDG

WD 40 Spray Lubricant 12 oz w/ Smart Straw

1/4-20 x 1/2", Carriage Bolt Grade 5 Coarse Z/P, ea

1/4-20 x 1/2 Full Thread Hex Bolts A307 Grade A Coarse Plain 100 ct

1/4-20 x 1/2 Full Thread Hex Bolt A307 Grade A Coarse Z/P 100 ct

1/4-20 x 1/2" ASTM A307 Gr A USS Galvanized

1/2"-13 x 1 1/4", Partial Thread A325 Structural Bolt Coarse Plain

1/2"-13 x 1-1/4", A325 Bolt Hot Dipped Galvanized

Female Iron Pipe x Female Iron Pipe Adapter, 1 ct

1/4"-20 x 3/4", Full Thread Tap Bolt A307 Grade A Coarse, 50 ct

Leather Work Gloves, Unlined, Large 1 ea

1/4-20 x 3/4 Full Thread Grade 5 Hex Tap Bolt Plain 100 ct

1/4-20 x 3/4", Hex Head Tap Bolt Grade 5 Coarse Z/P, ea

12-10 (1/4) Nylon Fully Insulated Male Quick Connector 25 ct

1/2"-13 x 1-1/4" ASTM A325 Structural Bolts USA, ea

Sizes #0 Thru 1/4", Type 27 T-Handle Tap Wrench, ea

Sizes #4 Thru 1/2", Professional Tap & Reamer Wrench, 1 ea

5/8-11 x 1-1/2 ASTM A490 Structural Bolt USA 10 ct

1/2-13 x 2 Full Thread A193 Grade B7 Heavy Hex Bolt Plain 25 ct

#8-32, Hex Flange Nut, Non-Serrated, Zinc Plate, 1 ea

3/8-16 x 1 Gr5 Plow Bolts #3 Head Plain 50 ct

35-3/8 W x 6-1/2" H x 8" D Bin Base, 1 ct

1/2" x .014 x 1/4" Knot End Brush Tempered, ea

5/8-11 x 1 1/2 A325 T.C. Bolt w/ A536 Hex Nut & F436 Washer 20 ct

1/8" ID x 1/16", Groove Firewall Grommet, ea

M5, External Snap Rings, Metric DIN 471, 25 ea

.050 Long Arm Hex Key, Alloy 6150, 1 ct

Permatex Anaerobic Gasket Maker, 1 ct

0.05 Long Arm Hex Key, ea

M4-0.70 Hex Nuts Class 8 DIN 934 Zinc Yellow 100 ct

M4-0.70 Class 04 DIN 439B Hex Jam Nut Coarse Zinc Plated, 100 ct

6-32X3/8 Torx (6 LOBE) Truss Full Thread MS Stainless Steel, 25 ct

M1.6-0.35 x 3mm, ISO 7045 Torx (6 Lobe) Pan Full Thread MS Z/P, 25 ea

M1.5, Metric Long Arm Hex Key, ea

M4-0.70 x 6 MM, Low Head Socket Cap Screw, 10.9 (FT) Black, 1 ea

14 Gauge Trailer Wire 3 Conductors, 100 ft

14 Gauge Trailer Wire 4 Conductors, 100ft

16 Gauge Trailer Wire 3 Conductors, 100 ft

16 Gauge Trailer Wire 4 Conductors, 100 ft

18 Gauge Trailer Wire 3 Conductors, 100 ft

18 Gauge Trailer Wire 4 Conductors, 100 ft

3/8" x 9" Long Standard Wood Auger Bit, 1 ct

M1.6-0.35 X 3 MM, SHCS Coarse, ea

M8-1.00 X 16 MM Socket Head Cap Screw Fine, each

M1.6-0.35 x 2.5 MM Set screw Cup Point 45H ISO 4029 DIN916 Coarse

M2-0.40 x 4 MM Flat Socket Cap 12.9 Coarse DIN 7991, ea

M2-0.40 x 3 MM Button Socket Cap Screw 12.9 Coarse 100 ct

#4-36 Round Die, Norseman CTD (USA), 1 ct

M3 x 8MM Dowel Pins Alloy DIN 6325, Plain

Anti-Seize Brand Air Tool Conditioner & Oil Pint, 1 ea

M6 - M5 x 10 MM Shoulder Screw ISO7379 Coarse 12.9, 1 ct

M1.6-0.35 x 3 MM, Socket Head Cap Screw Stainless A2 (18-8), 1 ea

M1.6-0.35 x 2.5 MM Set Screw Cup Point Coarse Stainless 18.8 A2 50 ct

Male Pipe X Male Pipe Adapter, 1 ct

1/4" x 1/8" DOT Push-In x MIP, 45° Elbow, 1 ea

1/4" Tube x 1/8" MIP, DOT Push-In 45° Swivel Elbow, 1 ct

Male Pipe X Female Pipe Adapter, 1 ct

1/4 Male Pipe X 1/8 Female Pipe Bushing Adapter, 1 ct

Hex Head Pipe Cap Adapter, 1 ct

Hex Socket Plug Adapter, 1 ct

Hex Head Plug Adapter, 1 ct

Loctite HydraulicThread Sealant 50ml, 1 ct

1/4" x .350-.625, Protruding Head Structural Rivet, Stainless Steel, ea

M5-0.80 Class 8 Hex Flange Nut Coarse Z/P DIN 6923, 1 ea

M3 Class 8 Hex Serrated Flange Nut Metric Coarse Z/P DIN 6923, 100 ea

M3-0.5X5, I7380 Torx (6Lobe) Button Cap Stainless Steel, 25 ct

M1.6-0.35x3 MM, Socket Head Cap Screw, A4 Stainless (FT), 1 ea

Male Pipe X Male Pipe 90 Degree, 1 ct

Male Pipe X Female Pipe 90 Degree Adapter

Male Pipe X Female Pipe 90 Degree Adapter

M3 x 6 MM Dowel Pins, Stainless A2 (18-8) DIN 7, 1 ea

1/8" Male Pipe X 1/8" Female Pipe 45 Degree Adapter, 1 ct

Female Pipe X Female Pipe 90 Degree Adapter

8 AWG Jacketed Primary Wire, 2 Conductors, 100'

10 AWG Jacketed Primary Wire, 2 Conductors, 100'

12 AWG Jacketed Primary Wire, 2 Conductors, 100'

12 AWG Jacketed Primary Wire, 3 Conductors, 100'

12 AWG Jacketed Primary Wire, 4 Conductors, 100'

16 AWG Jacketed Primary Wire, 4 Conductors, 100'

8-8 x 1 1/4", 6 Lobe (Torx) Flat Head Screw, Stainless T-17 Point, 1 ea

M3-0.50 Hex Nuts Class 8 DIN 934 Zinc Plated 100 ct

M4-0.70, Hex Nuts Class 8 DIN 934/ISO 4032 Plain, 100 ea

M2-0.40, (DIN 934) Stainless A4 (316) Hex Nuts, ea

1/16", E-Clip External Retaining Ring Clip, 100 ea

Male Pipe X Male Pipe X Male Pipe Adapter, 1 ct

Galvanized Nipple 1/8 x Close, 1 ea

Male Pipe X Male Pipe X Female Pipe Adapter, 1 ct

Male Pipe X Female Pipe X Female Pipe Adapter, 1 ct

Female Pipe X Female Pipe X Female Pipe Adapter, 1 ct

M2.5-0.45, DIN 985 Nylon Insert Thin Locknut Coarse Stainelss A2-70, 1 ea

0-80X1/8, Torx (6 Lobe) Pan Full Thread Machine Screw 18-8 Stainless, 25 ct

M3-0.50, Metric Wing Nut 316 Stainless Steel, 25 ea

1/8" Close Black Iron Nipple

M8 Internal Snap Ring-Din 472, 1 ea

No.1 (3/32 - 5/32) High Carbon Steel Screw Extractor, 1 ea

10-24 x 1/2 Full Thread Indented Hex Head Washer Z/P 100ct

#12 x 9/16" EPDM Galvanized Steel Bonded Washer

#6-32 x 3/8", Machine Screw, Round Head Phillips/Slotted Combo, (FT) Z/P

M1.6-0.35 x 3mm, I14583 6Lobe Pan MS A2 Stainless Steel, ea

#2-56 x 1/2", Machine Screw, Flat Head Slotted, (FT) Z/P

M12-1.25, 935-8 Slotted Hex Nut Zinc Plated, 1 ea

M1.6-0.35X3, ISO14581 6Lobe Flat MS FT Stainless Steel, 25 ct

0-80 x 1/16 Full Thread SHCS Fine Black 100 ct

1-64 x 3/16" Full Thread SHCS Coarse Black, ea

2-64 x 1/8 Full Thread SHCSs Fine Black 100ct

3-48 x 1/8 Full Thread SHCS Coarse Black 100 ct

3-56 x 1/8 Full Thread SHCSs Fine Black 100ct

4-40 x 1/8 Full Thread SHCS Coarse Thread Black 100 ct

10-32 x 3/16, Full Thread SHCS Fine Black 100ct

4-48 x 1/8 Full Thread SHCSs Fine Black 100ct

5-40 x 1/8 Full Thread SHCS Coarse Black 100 ct

5-44 x 1/4 Full Thread SHCSs Fine Black 100ct

6-32 x 1/8 Full Thread SHCS Coarse Black 100 ct

8-32 x 1/8 Full Thread SHCS Coarse Black 100 ct

8-36 x 1/4 Full Thread SHCS Fine Black 100ct

10-24 x 3/16" Full Thread SHCS Coarse Black 100 ct

12-24 x 3/8 Full Thread SHCS Coarse Black 100ct

12-28 x 3/8 Full Thread SHCSs Fine Black 100ct

1/4-20 x 1/4 Full Thread SHCS Coarse Black 100 ct

1/4-28 x 1/4, Full Thread SHCS Fine Black, 100ct

5/16-18 x 1/4 Full Thread SHCS Coarse Black 50 ct

5/16- 24 x 3/8 Full Thread SHCS Fine Black 50 ct

3/8-16 x 3/8 Full Thread SHCS Coarse Black 25 ct

3/8-24 x 3/8 Full Thread SHCS Fine Black 25ct

7/16-20 x 1/2 Full Thread SHCS Fine Black, 25 ct

1/2"-13 x 3/8", Full Thread SHCS Coarse Black, ea

1/2-20 x 1/2 Full Thread SHCS Fine Black 25 ct

9/16-12 x 1 SHCS Coarse Black 1ct

9/16-18 x 1 SHCSs Fine Black 1ct

5/8"-11 x 5/8", Full Thread SHCS Coarse Black, ea

3/4"-10 x 3/4", Full Thread SHCS Coarse Black, 1 ea

3/4"-16 x 1 1/4", Full Thread SHCS Fine Black, 1 ea

7/8-9 x 1 1/4 Partial Thread SHCS Coarse Black 1ct

7/8-14 x 2 Full Thread SHCS Fine Black 1 ct

1"-8 x 1 1/2, Full Thread SHCS Coarse Black, 1 ct

1-14 x 2 Full Thread SHCS Fine UNS Black 1 ct

1 1/8-7 x 2 Full Thread SHCS Coarse Black 1ct

1 1/8-12 x 3", Full Thread Socket Head Cap Screw Fine Black 1ct

1 1/4-7 x 2 Full Thread SHCS Coarse Black 1ct

1 1/4-12 x 2 Full Thread SHCSs Fine Black 1ct

1 3/8"-6, x 3", Full Thread SHCS Coarse Black, 1 ea

1 3/8-12 x 3 Full Thread SHCSs Fine Black 1ct

1 1/2-6 x 2 1/2 Full Thread SHCS Coarse Black 1 ct

1 1/2-12 x 3 Full Thread SHCSs Fine Black 1ct

1 3/4-5 x 3 Full Thread SHCS Coarse Black 1ct

12-14 x 3/4" Hex FLNG SDS Rubber Washer #3PT ZC NC BK 1000HR, ea

2-4 1/2 x 3 1/2 Full Thread SHCS Coarse Black 1ct

2-4 1/2 x 10 Partial Thread SHCS Coarse Black 1ct

#2-56 x 1/4", Machine Screw, Round Head Slotted, (FT) Z/P

#4-40 x 1/4", Machine Screw, Truss Head Slotted, (FT) Z/P

Norseman Spiral Bolt Extractors w/Drills, 10 PCS

Grease Gun Coupler, Lincoln, 1 ct

#2-56 x 1/4", Machine Screw, Flat Head Phillips, (FT) Z/P

Norseman™ 25 Pc. Metric Jobbers Drill Assortment

#2-56 x 3/16", Machine Screw, Pan Head Phillips, (FT) Z/P

#2-56 x 1/4", Machine Screw, Round Head Phillips, (FT) Z/P

#6-32 x 1/4", Machine Screw, Truss Head Phillips, (FT) Z/P

3/16 x 4" OAL (2-1/2" Depth) Imapct Hammer Drills 1 ct

1/4" (.250), Spring Internal Snap Ring, 1 ea

Iron Pipe Schedule 80 Nipples 1/8 x Close, 5 ct

#8-32 x 5/8", Machine Screw, Oval Head Phillips, (FT) Z/P

2-56X3/16, Torx Head (Six Lobe) Flat 82 Degree Screw Stainless Steel, 25 ct

#2-56 x 1/4", Machine Screw, Pan Head Slotted, (FT) Z/P

1-64 x 1/8", SHCS 18.8 Stainless Coarse, 100 ea

1/2"-10 x 16", Acme Lead Screw, RH, Steel Alloy, 1 ea

#4-40 x 1/4", Machine Screw, Pan Head Phillips External SEMS Z/P

1/16-27 High Speed Pipe Tap 1 ct

1/8" (.1250) External Snap Ring, 1 ea

3/8"-24 Grade 8 High Nuts, Plain Finish, 50 ct

1/4-20 Finished Hex Nuts Grade 5 Plain USA 100 ct

1/4-20 Finished Hex Nuts, Grade 5 Z/P USA, 1 ea

1/4-20 Finished Hex Nuts Grade 8 Plain USA 100 ct

1/4-20, Finished Hex Nuts Grade 8 Z/P Yellow USA ,100 ea

24-20, Clear Solder Seal Butt Connectors, 1 ea

0-80 Magnum USS High Speed Spiral Tap 1 ct

Top Post Lead Battery Terminal 6ga to 1ga Pos. & Neg. 1 ct

#6-32 Left Hand Tap, CTD Plug Type 24L-AG, 1 ea

#6-32 Left Hand Tap, Taper Type 23L-AG, ea

4-40 x 3/32 Set Screw Flat Point Coarse Black 100 ct

M1.6 x 0.35 Metric Tap, CDT Taper Type 31-AG

2-56 x 1/8 Socket Set Screw Cone Point Coarse Black 25 ct

4-40 x 1/8 Socket Set Screw Coarse Oval Point Black 100 ct

4-40 x 1/8 Half Dog Set Screw Coarse Plain 50 ct

3-48, Magnum USS High Speed Bottom Tap, 1 ea

4/40, Magnum USS High Speed Taper Tap

4/40, Magnum USS High Speed Plug Tap

6-32 x 1/4 Set Screw, Full Dog Point, Black, 1 ea.

1/2-13 x 1 1/4 A-325 Structural Bolt W/Nut Plain 1 ct

1/2" (#8) FNPT Wingnut THD Connector Nipple X 3/4 Body, 1 ea

1/2" (#8) FNPT Wingnut THD Connector X 3/4 Body, 1 ea

3" x 1/16" x 3/8", Grit Z 30 Max RPM 25000 Type1, ea

Electrical Tape Scotch Super 33 3/4 x 66FT, 1 ea

M1.6 x .35 Metric Tap, CTD Bottom Type 33-AG

M1.6 x .35 Metric Tap, CTD Plug Type 32-AG, 1 ea

1/4''-20 x 1-3/4'', Ultrawedge™ Concrete Anchors, 304 Stainless Steel, 1 ea

1/4"-20 x 1-3/4", Ultrawedge™ Concrete Anchors, 316 Stainless Steel

1/4 x 1 3/8 304 Stainless Sleeve Anchor-Hex Nut 50 ct

1/4" x 1" 304 Stainless Drop-In Achor with Tool 10 ct

Grade 8 Fastener Bin Assortment, 1892 pcs.

9/16", Magnum Super Premium Carbide Tipped Hole Cutter, each

#10-16 x 1/2" Hex Washer #3 Point Teks Self Drilling Screws (USA) 100 ct

3/16", DOT Push In Union, 1 ct

DOT Approved, Y Union, 1/4" Tube Push-In, ea

1/8", 304 Stainless Steel Cap

Drill Bit Extender, 1/2" Bore, 6" Extension

MINI-FUSE Gray 2 AMP, 10 ea

FUSE ATC-3A PINK 32 V 10 ct

M6-1.00 x 10MM, Full Thread Flange Screw Non Serrated 10.9 Y/Z, 1 ea

Klein Bolt Cutter, Steel 36" Long, 1 ct

MAXI-FUSE Yellow 20 AMP 5 ct

#6-20 x 1" Bugle Head Phillips #2 Point Self Drill, 100 ct

#10-16 x 3/4", Indent HWH,#3 Point Self Drilling Screw W/Bonded Washer Z/P, 100 ea

6400 Male JIC x Male Oring Adapter, 1 ct

Male Boss O Ring X Male Pipe Adapter, 1 ct

Male O Ring X Female JIC Adapter, 1 ct

Female O-Ring X Male Pipe Adapter, 1 ct

Male Boss O-Ring X Female Pipe Adapter, 1 ct

Male O-Ring Hex Head Plug Adapter, 1 ct

Male O-Ring X Female O-Ring Reducer Adapter, 1 ct

Galvanized 90 Degree Elbow 1/8", 1 ct

Galvanized 90 Degree Street Elbow 1/8, 1 ea

Galvanized 45 Degree Elbow 1/8 5 ct

Galvanized 45 Degree Elbow 1/8 5 ct

Female O-ring X Female O-Ring Adapter, 1 ct

Galvanized Pipe Tee 1/8", 1 ea

Galvanized Malleable Cross 1/4 1 ct