4-48 x 5/8 Full Thread SHCSs Fine Black 100ct

6-32 x 9/16 Full Thread SHCS Coarse Black 100 ct

8-32 x 9/16 Full Thread SHCS Coarse Black 100 ct

8-36 x 1 1/4 Partial Thread SHCS Fine Black 100ct

12-24 x 1 1/2 Partiall Thread SHCS Coarse Black 50 ct

3/8-24 x 1 3/8 Full Thread SHCS Fine Black 10ct

7/16-20 x 1 3/4 Full Thread SHCS Fine Black, 10 ct

1/2"-13 x 1 3/8 Full Thread SHCS Coarse Black, ea

1/2-20 x 1 3/8 Full Thread SHCS Fine Black 10 ct

9/16-12 x 3 SHCS Coarse Black 1ct

9/16-18 x 3 SHCSs Fine Black 1ct

5/8-18 x 2 3/4 Partial Thread SHCS Fine Black, 1 ct

3/4"-16 x 3", Partial Thread SHCS Fine Black, 1 ea

7/8-14 x 4 Partial Thread SHCS Fine Black 1 ct

1-14 x 4 Partial Thread SHCS Fine UNS Black 1 ct

1 1/8-7 x 5 1/2 Partial Thread SHCS Coarse Black 1ct

1 1/4-12 x 5 1/2 Partial Thread SHCSs Fine Black 1ct

1 3/8-6 x 7 Partial Thread SHCS Coarse Black 1ct

1 1/2-12 x 7 Partial Thread SHCSs Fine Black 1ct

1 3/4-5 x 7 Partial Thread SHCS Coarse Black 1ct

2-4 1/2 x 6 Full Thread SHCS Coarse Black 1ct

1 3/8-12 x 7 Partial Thread SHCSs Fine Black 1ct

#4-40 x 3/4", Machine Screw, Round Head Slotted, (FT) Z/P

#6-32 x 1", Machine Screw, Truss Head Slotted, (FT) Z/P

#4-40 x 1/4", Machine Screw, Flat Head Phillips, (FT) Z/P

#3-48 x 1/8", Machine Screw, Pan Head Phillips, (FT) Z/P

#4-40 x 5/8", Machine Screw, Round Head Phillips, (FT) Z/P

#8-32 x 3/8", Machine Screw, Truss Head Phillips, (FT) Z/P

Iron Pipe Schedule 80 Nipples 1/4 x 2 1/2, 5 ct

#10-24 x 1 3/4", Machine Screw, Oval Head Phillips, (FT) Z/P

5/8" (.625), Spring Internal Snap Ring, 1 ea

#4-40 x 5/16", Machine Screw, Pan Head Slotted, (FT) Z/P

0-80 x 3/4, SHCS Stainless Steel A2 Fine 18.8, 1 ea

1-64 x 3/4", SHCS 18.8 Stainless Coarse, 100 ea

#4-40 x 3/4", Machine Screw, Pan Head Phillips External SEMS Z/P

Iron Pipe Schedule 80 Coupling 2", 2 ct

1 1/4"-11 1/2 (5 Flute) NPT Taper Pipe Tap 1 ct

15/32" (.4687) External Snap Ring, ea

1"-14 Grade 8 High Nuts, Plain Finish, 10 ct

1/2-13 Finished Hex Nuts Grade 5 Plain USA 50 ct

1/2-13 Finished Hex Nuts, Grade 5 Z/P USA, 1 ea

7/16-20 Finished Hex Nuts Grade 8 Plain USA 50 ct

1/2-13, Finished Hex Nuts Grade 8 Z/P Yellow USA, 25 ea

4-40 Magnum USS High Speed Spiral Tap 1 ct

4-40 x 1/2 Set Screw Flat Point Coarse Black 100 ct

5/16"-24 Left Hand Tap, CTD Plug Type 24L-AG, 1 ea

5/16"-24 Left Hand Tap, Taper Type 23L-AG, 1 ea

5/16"-24 Left Hand Tap, CDT Bottoming Type 25L-AG, 1 ea

4-40 x 1/2 Socket Set Screw Cone Point Coarse Black 100 ct

5-40 x 1/8 Socket Set Screw Coarse Oval Point Black 100 ct

M3.5 x 0.60 Metric Tap, CDT Taper Type 31-AG

5-40 x 1/4 Half Dog Set Screw Coarse Plain 100 ct

10-32 x 3/4" Socket Set Screw 1/2 Dog Point Fine Plain, 1 ea

1/4" x 6" Masonry Screw, HWH Slotted, Blue Perma Seal, 1 ea

6-32 x 7/8 Set Screw, Full Dog Point, Black, 1 ea.

12/24, Magnum USS High Speed Taper Tap

5/8-11 x 4 A-325 Structural Bolt W/Nut Plain 1 ct

1/4-28 Magnum SAE High Speed Bottom Tap 1 ct

5/16-18, Magnum USS High Speed Plug Tap

3/8''-16 x 5'', Ultrawedge™ Concrete Anchors, 304 Stainless Steel, 1 ea

M4.0 x 0.70 Metric Tap, CTD Plug Type 32-AG, 1 ea

M3.5 x .60 Metric Tap, CTD Bottom Type 33-AG

1/2''-13 x 3 3/4'', Ultrawedge™ Concrete Anchors, 316 Stainless Steel

#12-14 x 2" Hex Washer #3 Point Teks Self Drilling Screws (USA) 50 ct

1", Magnum Super Premium Carbide Tipped Hole Cutter, each

3/4", DOT Push In Union, 1 ct

1-1/2", 304 Stainless Steel Cap

MINI-FUSE Yellow 20 AMP, 10 ea

FUSE ATC-25 A CLEAR 32 V 10 ct

M6-1.00 x 40MM, Partial Thread Flange Screw Non Serrated 10.9 Y/Z, 1 ea

MAXI-FUSE Violet 100 AMP, 5 ct

#8-18 x 3" Bugle Head Phillips #2 Point Self Drill, 100 ct

#12-14 x 1 1/4", Indent HWH,#3 Point Self Drilling Screw W/Bonded Washer Z/P, 100 ea

6400 Male JIC x Male Oring Adapter, 1 ct

Male Boss O Ring X Male Pipe Adapter, 1 ct

Male O Ring X Female JIC Adapter, 1 ct

Female O-Ring X Male Pipe Adapter, 1 ct

Male Boss O-Ring X Female Pipe Adapter, 1 ct

Male O-Ring Hex Head Plug Adapter, 1 ct

1/2" DOT Brass Push In Union Tee, ea

Male O-Ring Hex Socket Adapter, 1 ct

Male O-Ring X Female O-Ring Reducer Adapter, 1 ct

Galvanized 90 Degree Elbow 1-1/2", 1 ct

Galvanized 90 Degree Street Elbow 1-1/2", 1 ea

Galvanized 45 Degree Elbow 1-1/2" 2 ct

Galvanized 45 Degree Elbow 1-1/2" 2 ct

Galvanized Pipe Tee 2" 1 ct

Galvanized Coupling 1-1/2, 2 ct

Galvanized Reducing Coupling 1" x 3/4, 5 ct

Galvanized Pipe Cap 1-1/2", 1 ct

Galvanized Pipe Hex Bushing 3/4" x 1/4", ea

Galvanized Pipe Square Plugs 1-1/2", 1 ea

Male JIC x Female JIC, 90 Degree Adapter, 1 ct

Female Swivel x Male Pipe, 90 Degree Adapter, 1 ct

Male JIC x Female JIC Swivel, 45 Degree Adapter, ea

Male JIC x Female JIC Swivel, 90 Degree Adapter, 1 ct

Female JIC x Male Pipe Adapter, 1 ct

Female JIC Swivel x Female Pipe Adapter, 1 ct

1-1/2" Elbow (90 Degree) Black Iron Pipe, 1 ct

1-1/2" Street Elbow (90 Degree) Black Iron Pipe, 1 ct

1-1/2 Black Iron Tee, 1 ct

1-1/2, Black Iron Coupling, 1 ct

1-1/2 B-Iron Cap, 1 ct

3/4 X 1/4" B-Iron Hex Bushing, 1 ct

1-1/2 B-Iron Union, 1 ct

Black Square Schedule 40 Plug 1 1/2", ea

Male JIC x Male JIC x Female JIC Swivel Adapter, 1 ct

Male JIC x Female JIC Swivel x Male JIC Adapter, 1 ct

M2-0.40 x 5mm,Pan Head Philips Machine Screw, Zinc Plated, 1 ea

#10-12 x 1" Torx Flat Head, Self Tap, SS 18-8, Tamper Proof Screw

#10-12 x 1" Self-Tap Hex Washer Head, Type A (FT) w/Slot, SS 304, 1 ea

1", 6-Flute 82 Degree Countersink, 1 ea

Male JIC x MOR Male Boss, 90 Degree Adapter, 1 ct

Male JIC x MOR Male 45 Degree Adapter, 1 ct

Male JIC x MOR Male Boss x Male JIC Adapter, 1 ct

1/4 Push-In x 3/8 MIP, D.O.T. Push In Male Connector, 1 ea

MOR Male Boss x Male Pipe 90 Degree Adapter, 1 ct

MOR Male Boss x MOR Male Boss 90 Degree Adapter, 1 ct

MOR Male Boss x Female Boss 90 Degree Adapter, 1 ct

#6-32 x 3/4", Indent HWH Unslotted Thread Cutting Screws Type 23, 100 each

M10-1.5 x M16-2.0 Thread Repair Insert 5 ct

5/16"-18 x 1 3/4", 6 Lobe Flat Floorboard Thread Cutting Screw

MOR Male Boss x Female Pipe Swivel Adapter, 1 ct

3/8" Push-In x 1/4" MIP D.O.T. Push In Male 90 degree, 1 ea

3/8" Push-In x 1/2" MIP Swivel 90 degree Elbow, 1 ea

Iron Pipe Schedule 80 Elbow 90 Degree 2", 2 ct

2" 90 Degree Street Elbow Schedule 80, 1 ct

Iron Pipe Schedule 80 Elbow 45 Degree 2", 2 ct

Pan Head Six Lobe (Torx Head) Type 23, 1/4-20 x 1/2, 25 ct

2" Straight Tee Schedule 80, 1 ct

#8-18 x 3/8", Self Drilling Screw, Hex Washer Head Z/P, 1 ea

8-18 x 3/8 Self Drill Phillips Pan Hd Screw 2 Pt 100 ct

#8-18 x 3/4",Full Thread Flat Head #2 Point Self Drilling Screw Z/P, 100 ct

Iron Pipe Schedule 80 Cap 2", 2 ct

#8-15x1" Flat Head Square Tapping Screws Type A 100 ct

#6-18 x 1 1/4" Flat Head Phillips Tapping Screw Type A Zinc Plated, ea

Iron Pipe Schedule 80 2" Union, 2 ct

#6-18x5/8" Pan Head Phil Tapping Screws Type A Z/P 100 ct

#8-15x1 1/2" Round Head Phil Tapping Screws Type A Z/P 100 ct

#8-15x5/8" Truss Head Phillips Tapping Screws Type A Z/P 100 ct

#6-18x1 1/2" Oval Head Phil Tapping Screws Type A Z/P 100 ct

#6-18x2" Pan Head Slot Tapping Screws Type A Z/P 100 ct

#7-16 x 3/4", Self Tapping Screw, HWH w/Slot, Type A, ea

#10-12x1" Indent HWH Unslot Tapping Screws Type A Z/P 100 ct

#6-18x5/8" Pan Head Combo Tapping Screws Type A Z/P 100 ct

5/16"-9x1" Indent Hex Head Unslot Tapping Screws Type A Z/P 50 ct

#8-15x3/4" Pan Head Square Tapping Screws Type A Z/P 100 ct

#8-15x2" Flat Head Slot Tapping Screws Type A Zinc Plated 100 ct

#5-20x3/4" Flat Head Phillips Tapping Screws Type AB Z/P 100 ct

#6-20x1/2" Indent Hex Washer Slot Tapping Screws Type AB Z/P 100 ct

#8-18x3/8" Indent HWH Unslot Tapping Screws Type AB Z/P 100 ct

#6-20x3/8" Pan Head Phillips Tapping Screws Type B Z/P 100 ct

#8-18x3/8" Indent Hex Washer Head Slot Type B Z/P 100 ct

#10-24x3/4" Flat Head Phillips Cutting Screw Type F Z/P 100 ct

#8-32 x 3/8" Full Thread HWH Slot Thread Cutting Screw Type F Z/P 100 ct

1/2" x 1/2" x 1 FT Keystock, Square Undersize 300 SS

3/8" Tube x 3/8" FIP, Brass DOT Push In Female 90° Elbow

0-80 X 3/4 Button Head Socket Cap Screw Plain Fine

2-56 X 3/4", Button Head Socket Cap Screw Plain Coarse, 100 ea

1/4-20 x 1 3/4, 12 Point Flange Screw Plain, ea

1-72 x 3/16 Button Socket Cap Screws 18.8 SS A2 Fine 100 ct

2-56 x 1/4", Button Socket Cap Screws Coarse SS A2 18.8, 1 ea

6-32 x 3/8 Set Screws Flat Point Coarse Stainless 18.8 100 ct

5/16" Dia x 2 1/2" Length Universal Clevis Pin with Holes, 25 ct

5/16" x 3/4", Single Hole Clevis Pin Plain, 1 ea

6-32 x 3/8 Socket Set Cone Point Coarse Stainless 18.8 100 ct

6-32 x 3/8 Set Screws 1/2 Dog Point, 18.8 Stainless, 1 ea.

5/16" x 5/16" x 1 FT, Key Stock, Square Undersize Carbon Steel Z/C, ea

1/8"-4-40 x 3/4", Socket Head Shoulder Screw Coarse A2 18.8, ea

3/8 Tube x 1/4 Tube x 3/8 MIP DOT Composite Run Tee

1/4-10-24 x 1-3/4", Shoulder Screw Black Coarse, 1 ea

0-80 x 3/4 Flat Socket Cap Screw Fine SS A2 18-8 50 ct

2-56 x 7/8", Flat Socket Cap Coarse SS A2 18-8, ea

48 Nylon Cable Tie-125 lb-Natural 50 ct

24" Nylon Cable Tie-125 lb-Black, 50 ct

3/8" Push In x 3/8" MPT, DOT Composite Male Branch Tee, 1 ea

0-80 X 3/4 Flat Socket Cap Screw Plain Fine

250 Volt 4 Amp AGC Fuse, 5 ct

No. 20 13/16" Thru 1-3/4" All Stainless Hose Clamp

1/4"-20 x 3 1/2"(PT) A 307 Grade A Square Head Bolt Z/P, 1 ea

.072 x 1-3/32 Hair Pin Cotter Z/P 100 ct

Snap Pin Coil Tension 3/4 X 5 1/2" HD Low Carbon Steel Z/P, ea

M10-1.25 x 1 Meter, Metric All Thread Rod, Fine, Zinc Plate

8/36 Magnum Tap & Drill Combo 1 ct

M16, Hi-Collar Lock washer DIN 7980 Plain, 1 ea

M16, DIN127B Split Lock washers Thru-Hardened Plain, 1 ea

M24 DIN127B Split Lockwashers Zinc Yellow 50 ct

Stainless Steel Heavy Hex Nut, 1"-8, 1 ct

5/16-18 x 3/4", Full Thread A307 Grade A Square Head Bolt Plain, ea

3/8 Split Lock Washers Stainless A2 18-8

3/8" Split Lock Washer Stainless 316, 50 ct

3/4"-10, NTE (THIN) Nylon Insert Locknut Grade A Zinc Yellow, 1 ea

9/64", 4 Flute Double-End Solid Carbide End-Mill

7/16"-20, Hex Nuts Fine Stainless A2 18.8, 1 ea

7/16-20 Hex Nuts Stainless Fine 316 1 ct

8-32 x 5/16 Hex Machine Screw Nuts Coarse SS A2 18-8 100 ct

1/2"-13 Hex Jam Nut Coarse Stainless 18.8, 1 ea

3/8"-16 Locknut Kep Hex Nut Fine Stainless Steel A2 (18-8), ea

1/2-13 Wing Nuts Cold Forged 18.8 Stainless, 1 ea

1"-8, Hex Nuts Heavy Coarse Stainless Steel (18.8), 1 ct

1/2"-13 x 1', A307 Grade A All Thread Rod, UNC HDG

3/0 Heavy Duty Butt Connector Plated Orange, ea

4-40 x 5/8, Full Thread Phillips Flat Head Coarse SS A2 18-8, 100 ea

#4-40 x 7/8" Phillips Oval Head Machine Screw, (FT) 18.8 Stainless, 1 ea

2-56 x 1/2", Phillips Pan Machine Screw Coarse 18.8, ea

8-32 x 5/16 Full Thread Philips Truss Head Coarse SS A2 18-8 100 ct

1/2"-13 x 3 3/4", B7 Stud Plain (End to End)

1/4"-20 x 10', A307 Grade A All Thread Rod, UNC Plain

1/4"-20 x 6', A307 Grade A All Thread Rod, UNC Zinc Plate

1/4"-20 x 3/4" Carriage Bolt, 18-8 Stainless (A2) FT, 100 ct

1/4"-10 x 3" Hex Lag Screw, Stainless 18.8 Coarse, ea

#12-11 x 3/4" Phillips Flat Head Screw, Undercut, Type A 18-8, 100 ct

#4-24 x 1 1/4" Phillips Oval Head Screw, Self Tap Type A 18-8

#4-24 x 5/16" Phillips Pan Head Screw, Self Tapping Type A 18-8, 100 ea

M5-0.80 x 55 MM,(PT),DIN 931 Hex Cap Screw Coarse SS A4 (316), 1 ct

M5-0.80x16 MM,(FT),DIN 933 Hex Cap Screw Coarse SS A4 (316), ea

1/16 .062 x 5/8 Roll Pins-Steel 100 ct

M2 x 16mm Metric Roll Pin-Steel

1/4"x15/16" Spring Pins Stainless Steel 420 100 ct

8-32 x 3/8 Full Thread Coarse Black Tamper Resistant 100 ct

8-32 x 3/8 Full Thread Botton Coarse 18.8 Tamper Resistant 100 ct

6-32 x 1/2Full Thread Flat Coarse Tamper Resistant Black OX 100 ct

8-32 x 3/4 Full Thread Coarse SS 18.8 Tamper Resistant 25 ct

6-32 x 5/8 Full Thread Socket Cap Coarse Tamper Resistant 100 ct

M5-0.80 X 20 MM Hex Cap Screw 8.8 DIN 933 Coarse

1/2", 3/8 Reduced Shank Magnum Drill Bit

M3-0.50 x 16 Set Screws Knurled Cup Point Coarse 45 H ISO 4029 100 ct

M3-0.50 x 25 MM Flat Socket Cap Screw Coarse 18.8 Stainless, 1 ea

M4-0.70 x 8 MM Button Socket Cap Screw 18.8 Stainless 100 ct

3/4"-10, All Metal Locknuts Coarse USS Gr C Z/P, ea

3/4"-16, All Metal Hex Locknuts Fine SAE Gr C Z/P, 10 ea

15/64", Air Craft Extension Drill Bit 12" Over All Length, ea

M12-1.50, Hex Cone Locknut Class 10 Z/P DIN 980V Fine, 1 ea

M5-0.80 X 30 MM Hex Cap Screw 18.8 Stainless DIN 933 Coarse, 1 ea

M4-0.70 x 6 MM Socket Set Cone Point Coarse 45h ISO 4027 Din 914 100 ct

M4-0.70 x 5 MM Set Screws Flat Point 45H Coarse DIN 913 100 ct

M5-0.80x20 MM Set Screws Dog Point 45H Coarse DIN 915, 100 ct

M14-2.00, Hex Nuts Coarse Stainless A2 18-8, ea

M8 Split Lock Washers Stainless A2 18-8, 100 ea

Heavy Duty T-Bolt Hose Clamp 3/4 x 2 1/2, 1 ct

M7-1.00, Metric Hex Die, Norseman CDT (USA), ea

1" x 1" x 1/4", Grit A120 Flap Wheels, ea

T-Bolt Spring Loaded Clamp 3.06-3.38

3/4-10 Nylon Insert Locknuts Grade 8 Y/Z, 1 ea

3/4-16 GrC SAE Nylon Insert Lock Nut Y/Z/P, 1 ea

1/4-20 x 1 3/8", Partial Thread Hex Cap Screws Grade 5 Coarse Plain, 100 ea

1/4-28 x 1 3/4 Partial Thread Hex Cap Screws Fine Grade 5 Plain 100 ct

1/4"-20 x 1 1/4", Grade 5 UNC Hex Cap Screw, (PT) Z/P

1/4"-28 x 2 1/2", Grade 5 UNF Hex Cap Screw, (PT) Z/P

7/16-20 Finished Hex Nuts Gr5 SAE Fine Z/P 100 ct

7/16-20, Finished Hex Nuts Grade 5 Fine Plain, 100 ea

3/4 Grade 5 USS Flat Washer Through Hard Zinc Plated, 50 ea

#4-40, Round Adjustable Die, Norseman CTD (USA), ea

3/8 Grade 5 SAE Flat Washer Though Hard Z/P 100 ct

5/16"-24, Hex Flange Nuts Serrated Case Hard Fine Z/P, 100 ea

1/4-20 Locknuts External Tooth Keps Nut Z/P, ea

7/16"-20 Reversible Locknut Low Carbon Z/P 50 ct

#12-24 Hex Die, Norseman CTD (USA), 1 ea

1/4-20 Type D Style 1 Wing Nuts Stamped Coarse Z/P, 100 ea

1/4"-20 x 3", Full Thread Hex Cap Screws Coarse Stainless 18.8

11/64", Magnum Super Premium Drill Bit

(MX4560TH) 4 1/2 x 5/8-11 Grit A 60, 10 ct

6" x .020 x 5/8-11, Knot Cup Brush Tempered Max RPM 6000, 1 ea

3 x 1/8 x 3/8 Grit A46T Max RPM 25000 25 ct

14" x 1/8" x 1", Chop-Saw Cut-Off Wheel, ea

(SR1180) 1" x 50 yards Cloth Shop Rolls Grit A180, 1 ea

M16-2.00 x 1 Meter, Metric All Thread Rod, Coarse 304 Stainless

200 Amp Bolt Down MEGA Fuse, 32 VDC Volt Rating, 1 ea

5-40 x 1/2 Full Thread SHCS Coarse Z/P 100 ct

6-32 x 3/8 Set Screws Cup Point Z/P Bake Coarse 100 ct

(DCRED60H) 6 x 1/4 x 5/8-11 REDLINE Grinding Wheel 24R Grit, 10 ct

8-32 x 1/4", Full Thread Button Socket Coarse Z/P, each

6-32 x 1/2 Full Thread Socket Cap Coarse Z/P 100 ct

M8-1.25 x 40 MM, Socket Head Cap Screw, 12.9 Coarse, Z/P (PT)

6" x 1/4" x 7/8", Grit A24R Max RPM 10200, 1 ea

M4-0.70 x 5 MM Set Screw Cup Point 45H Coarse ISO 4029 DIN916 Z/P 100 ct

4 1/2" x 5/8-11 Pearl 877358 Maxidisc™ EXV High Density, T-27, 80 Grit Flap Disc, 1 ea

11/64 Magnum Super Premium Screw Machine Drill Bit 12 ct

M5-0.80 x 10 MM Full Thread Socket Caps 12.9 Coarse Z/P Bake 100 ct

M4-0.70 x 8 MM Full Thread Button Cap 12.9 Coarse ISO 7380 Z/P 100 ct

1/4"-20 x 12', ASTM F593 All Thread Rod, UNC 304 Stainless

5/16"-18 x 12', ASTM F593 All Thread Rod, UNC 316 Stainless

1/4-20 x 2 Round Phillips COMBO Head Toggle Bolt Z/P 50 ct

Acme Hex Nut, 1 1/4"-5 Right Hand, Carbon Steel, ea

7/8"-9xW1 1/4"xL2 1/2" Hex Coupling Nut A563-A H.D.G. 5 ct

Clevis Hanger Adjustable Pipe 3-1/2" 1 ct

M22-1.5 Metric ORB Male x 1/2" NPTF Female Adapter, 1 ea

11/64 Magnum Left Hand Jobber Drill Bit 3 ct

1-1/2 NPT Full Port 600WOG Forged Ball Valve Import 1 ct

5/16 x 1/4 x 4" All Purpose Masonry Drill, ea

2" One-Piece Standard Port Ball Valve 316

2", 3-Piece Standard Port Ball Valve 316

1/4 Magnum Double End Drill 6 ct

(AE-085-301) 1/2" x 36" OAL (30" Depth) Spline Single Cutter Drill, 1 ea

6 x 1 x 1 Grit A24 Max RPM 4140 1 ct

6 x 1 x 1 Grit C80 Max RPM 4140 1 ct

5/16", Bore Solid Shaft Collar Black Oxide Steel, 1 ct

7/32" x 8 1/2", (6" Usable Length) SDS-PLUS Carbide Bit, 1 ea

Battery Terminal Top Post Straight - 1 GA Positive, ea

1 x 30 Resin Cloth Belts Grit A120 10 ct

1-1/8", Bore Single Split Coupling Black Oxide Steel, 1 ct

3/4" x .014 x 1/4" Crimped End Brush Tempered Max RPM 20000, ea

4" x .020 x 5/8"-11 Knot Wheel Twist, 1 ea

5/8", Bore Solid Shaft Collar 316 Stainless Steel, 1 ct

4 x 1/8 x 3/8 Grit A46T Max RPM 19000 25 ct

7" x .040 x 7/8", Grit A 46 Max RPM 8500 Type 1, 25 ea

9 x 1/4 x 7/8 Grit C24T Max RPM 6500 10 ct

E-Z LOK Thread Repair Kit for Metal - Thin Wall -7/16-14 x 9/16-12, ea

1"-8 x 6', F1554 Grade 55 All Thread Rod (USA), UNC Plain

1"-8 x 6', F1554 Grade 55 All Thread Rod (USA), UNC HDG

7/16" x 7/16" x 1 FT, Key Stock, Square Oversize Carbon Steel

4-1/2 x 1/8 x 7/8 Grit AC46 Max RPM 13300 25 ct

4 x 5/8 Grit A 120 Max RPM 15000 25 ct

4 x 5/8 Grit A 120 Max RPM 15000 25 ct

4 1/2 x 5/8-11 Grit CB80 Max RPM 13000 25 ct

5 x 5/8-11 Grit CB36 Max RPM 11900 25 ct

Male Flat Face x Male Pipe Adapter, 1 ct

Male Flat Face Plug Adapter, 1 ct

ORFS CAP ADAPTER

Male Flat Face x MOR Male Boss Adapter, 1 ct

Male Flat Face x MOR Male Boss 90 Degree Adapter, 1 ct

Female Flat Swivel x MOR Male Boss 90 Degree Adapter, 1 ct

4 1/2 x 1/8 x 7/8 Grit SRT 46 Max RPM 13300 25 ct

3/8 Coupler x 1/2 Hose Barb, 1 ct

5 x 7/8 Grit Z 50 Max RPM 11900 25 ct

5 x 7/8 Silicone Carbide Grit C24 Max RPM 12000 25 ct

1" x 12", Adhesive Lined Heat Shrink Tube-Red

A= 1/2-13 B= 6" C= 1-3/16 D= 2-1/16 1 ct

A= 1/2-13 B= 1-1/2" C= 1-3/16 D= 2-1/16 1 ct

A= 3/4-10 B= 2" C= 1-1/2 D= 2-13/16 1 ct

A= 3/4-16 B= 2" C= 1-1/2 D= 2-13/16 1 ct

A= 1"-8 B= 2-1/2 C= 1-13/16 D= 3-9/16 1 ct

A= 5/16-18 B= 3" C= 7/8 D= 1-7/16 1 ct

Forged Eye Bolt, A= 3/8-16 B= 1-1/4 C= 1" D= 1-21/32, 1 ct

A= 7/16-14 B= 1-3/8 C= 1-3/32 D= 1-27/32 1 ct

A= 5/8-11 B= 1-3/4 C= 1-3/8 D= 2-1/2 1 ct

A= 5/8-11 B= 4-1/2 C= 1-3/8 D= 2-1/2, 1 ea

A= 3/4-16 B= 2" C= 1-1/2 D= 2-13/16 1 ct

9 x 11 Waterproof Sheets Grit C280 50 ct

8 1/2 Inch Grit C-400 Special Design Polishing & Finishing 50 ct

9 x 11 Waterproof Sheets Grit C280 50 ct

9 x 11 Waterproof Sheets Grit C240 50 ct

Veratti 429 Gray Anti UVA UVB ENFOG Safety Glasses, 1 ea

A= M16x2.00 B= 44.5mm C= 35mm D= 65mm 1 ct

A= M16x2.00 B= 32mm C= 35mm D= 65mm 1 ct

4 1/2 x 5/8-11 Grit Z120 Max RPM 13300 Type-27 10 ct

4 1/2 x 7/8 Grit A 60 Max RPM 13300 10 ct

4 1/2 x 5/8-11 Grit A 60 Max RPM 11000 10 ct

4 1/2 x 5/8-11 Grit CBT 60 Max RPM 13300 10 ct

4 1/2 x 5/8-11 Grit C80 Max RPM 13300 10 ct

(MAX458ZEH) 4 1/2" x 5/8"-11, Z80 Type 27 Flap Disc, 1 ea

5 x 7/8 Grit Z 40 Max RMP 12200 Type-27 10 ct

5 x 5/8-11 Grit Z40 Max RPM 12200 10 ct

5 x 7/8 Grit CBT 60 Max RPM 12200 Type-27 10 ct

5 x 7/8 Grit Z 120 Max RPM 12200 10 ct

14mm, Bore Solid Shaft Collar Zinc Plated, 1 ct

14mm, Bore Solid Shaft Collar Stainless Steel, 1 ct

5 x 7/8 Grit Z 40 Max RPM 12200 Type-27 10 ct

1", Bore Solid Shaft Collar Nylon, 1 ct

5 Sanding Disc Best Grit A220 200 ct

6 Sanding Disc Best Grit A80 125 ct

3/4", Bore Soild Rigid Coupling Black Oxide, 1 ct

3/4", Bore Soild Rigid Coupling Stainless Steel, 1 ct

1", Bore Solid Shaft Collar Zinc Plated Steel, 1 ct

3 x 19 Stainless Wire Scratch Brush 12 ct

E-Z Coil™ Thread Repair Kit for Metal - Standard - 4-40 x 2D

E-Z Coil™ Threaded Repair Kit For Metal - M10-1.5 x 1.5D, ea

Solid 304 Stainless Steel Shaft Collar 9/16 Bore, 1 ct

#3 x 6", Hex Shank PHILLIPS DRIVE BITS, 1 ct

5/16" x 6", IMPACT Magnetic Power Nutsetter, 1 ea

T25 X 1" TORX Bit Star Drive Screwdriver Bits, 5 ea

5/16", Bore Solid Shaft Collar Unplated Steel, 1 ct

M12-1.50 x 1 Meter, Metric All Thread Rod, B7 Fine Plain

3/4"-16 Hex Jam Nut Stainless Steel 316, 1 ea

M16-2.00, Metric Wing Nut 304 Stainless Steel, 5 ea

#10-24 x 1" Thumb Screw, 18-8 Type B No Shoulder, 1 ea

ASCE 5-2 5/32 (.020-.125), Alum/Steel Dome Closed-End Blind Rivets, 100 ct

AACE 6-6 3/16 (.251-.375), Alum/Alum Dome Closed-End Rivets, ea

STSSCE 6-8 3/16 (.376-.500), Stainless Grooved Dome Closed-End Rivet, 25 ct

ASLF 43-45 1/8 (.125-.312), Alum/Steel Dome Multi-Grip Blind Rivets, 100 ct

1 1/4"-7 x 12', F1554 Grade 36 All Thread Rod, UNC Plain

3/4"-10 x 12', F1554 Grade 36 All Thread Rod (USA), UNC HDG

1 1/8"-7 x 12', F1554 Grade 36 All Thread Rod, UNC Zinc Plate

#8-15 x 1 1/4" Phillips Oval Head Screw, Self Tap Type A 316, 100 ea

#6-18 x 1" Phillips Flat Head Screw, Self Tap Type A 316, 1 ea

#6-18 x 3/4" Phillips Pan Head Screw, Self Tapping Type A 316, 100 ea

1/4"-10 x 4", Hex Lag Screw, 316 Stainless Steel, 1 ct

1/4-20 (.027-.165) Steel Large Flange Knurled Rivet Nut Y/Z, ea

1/2" x 5 5/16", Headed Weld Stud w/ Ferrule, 1 ct

11/16" X 1", Deep Cut Carbide Tipped Annular Cutter

7/8", (6-1/2)TON Screw Pin Anchor Shackle, 1 ea

#4-40 x 5/8", Full Thread Socket Head Cap Screw Coarse Thread Black, 100 ct

#6-32 x 5/8", Full Thread SHCS Coarse Black, 100 ct

#8-32 x 5/8", Full Thread Socket Head Cap Screw Coarse Black, 100 ct

#10-32 x 5/8", Full Thread SHCS Fine Black, 100ct

1/4"-20 x 7/8", Full Thread SHCS Coarse Black, 100 ct

1/4"-28 x 1", Full Thread SHCS Fine Black, 100ct

5/16"- 24 x 1 3/4", Partial Thread SHCS Fine Alloy Black, 50ct

3/8"-24 x 1 1/2", Full Thread SHCS Fine Black, 50ct

7/16"-14 x 2", Partial Thread SHCS Coarse Black, 25 ct

7/16"-20 x 2", Partial Thread SHCS Fine Black, 25 ct

1/2"-13 x 1 1/2", Full Thread SHCS Coarse Black, ea

1/2"-20 x 1 1/2" Full Thread SHCS Fine Black 25 ct

5/8"-11 x 2", Full Thread SHCS Coarse Black, ea

3/4"-10 x 2 3/4", Full Thread SHCS Coarse Black, 1 ea

7/8"-9 x 3 1/4", Partial Thread Socket Head Cap Screw Coarse Black Oxide, 1ct

1"-8 x 3 1/2", Partial Thread Socket Head Cap Screw Coarse Black Oxide, 1 ct

1 1/4"-7 x 4 1/2", Partial Thread Socket Head Cap Screw Coarse Black, 1ct

1 1/2"-6 x 6", Partial Thread Socket Head Cap Screw Coarse Black, 1 ct

7/16" Hi-Collar Split Lockwashers Plain, 50 ct

1/16" x 1/2" ID x 5/8" OD Nitrile O-ring, ea

#8-32 x 5/8", Socket Head Cap Screw, 316 Stainless, Coarse, 50 ct

#5-40 x 3/8", Full Thread Socket Head Cap Coarse Nylon Patch, 100 ct

10-24 x 3/4", Low Head Socket Cap Coarse, Black Oxide, 1 ea

1" X 1 1/8 Dropped Forged Carbon Steel (8 1/2 Ton), 1 ct

7/8 x 1" Drop-Forged Carbon Steel (6 1/2 Ton), 1 ct

1" x 1-1/8 Drop-Forged Carbon Steel (8 1/2 Ton), 1 ct

1-1/4 X 1-3/8 Drop-Forged Carbon Steel (12 TON) 1 ct

3/4 x 7/8 Galv. Shackle (6,500 Pound), 1 ct

10 GA Primary Wire -100 ft roll -Orange, ea

SBS 6-12L 3/16 (.626-.750)x0.925, Steel/Steel Large Dome Head Rivet, 50 ct

ABA 6-10L 3/16 (.501-.625)x0.800 ALUM/ALUM Large Dome Head Rivet, ea

ABS 6-14L 3/16 (.751-.875)x1.075 Alum/Steel Large Dome Head Rivet, 100 ct

SSBSS 6-12L 3/16(.626-.750)x0.925, , Stainless Large Dome Head Rivet, 25 ct

#8-18 x 3/4" Flat Head Screw, Phillips #2 Pt. Self Drill, SS 410, 100 ea

#7-19x3/8", Indent HWH Unslot,#2 Pt Self Drilling Screw SS 410

#7-19 x 1/2" Phillips Pan Head Screw, Self Drilling, SS 410, 100 ea

1/2" x 8" TAPKING™ HD Concrete Screw Anchor, Zinc/P, 1 ea

Battery Cable, 6 ga Red, 25ft

Battery Terminal Top Post Straight - 1/0 Negative

6 gauge 3/8" Stud Size, Lugs -Copper/Tin

11/64, Magnum Super Premium Drill Bit

#6-9 x 2 1/4", Bugle Head Pillips Coarse Drywall Screw Black, 100 ct

15/16" x 1/2" Shank, Norseman Spiral Flute Reamer, 1 ea

11/64, Cobalt Heavy Duty Drill Bit M42, 135 Degree, ea

1/2"-13, Grade G Flange Top Lock Nut, Plain UNC (Coarse)

SCS 6-8 3/16 (.376-.500)x0.675, Steel/Steel Countersunk Blind Rivet, 100 ct

3/4" SAE 45 degree Flare Short Rod Nut, 1 ct

16-14 Ga. Non-Insulated #6 Ring Terminal, 1 ea

14 - 17 MM Oetiker Hose Clamp, 2-Ear Zinc Plate, 1 ea

5-40 x 3/16 Cup Point Set Screw UNC

7/8", SAE 45 degree Flare Union, ea

10-32 x 5/16" Set Screw Cup Point Fine Plain

5/8" x 5/8" x 1/2" SAE 45 degree Flare Reducing Tee, ea

#1-72 x 3/32" Socket Set Screw Cup Point Fine 18-8 100 ct

3/8 x 1/2 Male SAE 45 degree Flare x MIP Branch Tee, 1 ct

3/8 x 1/4 Male SAE 45 degree Flare x Female IP Adapter 1 ct

5/16 x 3/8 Male SAE 45 degree Flare x Male IP Adapter 1 ct

5/16" Male SAE 45 degree Flare x 3/8" Male IP 90 degree Elbow, ea

3/8 x 1/2 Male SAE 45 degree Flare x Female IP Elbow 90 degree 1 ct

1/2 x 3/8 Male IP x 45 degree Flare Male Run Tee 1 ct

6-32 x 5/16 Socket Set Screw Cup Point 316 Coarse 100 ct

7/8 Male SAE 45 degree Flare Forged Elbow 90 degree 1 ct

1/2" Male SAE 45 degree Flare x 1/2" Male IP 45 degree Elbow, ea

6-32 x 1/2 Set Screws Cup Point Coarse Nylon Patch 100 ct

5-40 x 5/16 Set Screws Knurled Cup Point Coarse Black 100 ct

3/4"-16, Track Shoe Nut Plain Finish Square 170M PSI, 1 ea

3/4-16 x 2 13/32, Track Shoe Bolts Plain 170M PSI, 1 ea

1/4-20 x 3/8 Set Screw Coarse Cone Point Nylon Patch 100 ct

Disc-Lock Washer, Glued Pair, 22MM, 7/8", ea

5-40 x 3/16 Socket Set Screw Coarse Oval Point Black 100 ct

ACA 6-8 3/16 (.376-.500)x0.675, Alum/Alum Countersunk Blind Rivet, 1 ct

Milwaukee Porta-band Saw Blade 14/18TPI 44-7/8, 1 ea

ACS 6-6 3/16 (.251-.375)x0.550, Alum/ Steel Countersunk Blind Rivet, 1 ct

1/4"-20 x 2", Grade 8 Carriage Bolt Zinc Yellow, ea

1404 Male Pipe x Female Pipe Swivel, 1ct

Female Pipe x Female Pipe Adapter, 1ct

5/16-18 x 3/8 Set Screws 1/2 Dog Point Coarse Nylon Patch 100 ct

Male Pipe x Female Pipe Swivel 90 Adapter, 1 ct

Male Pipe x Female Pipe Swivel 45 Degree Adapter, 1 ct

5-40 x 1/8 Set Screw Flat Point Coarse Black 100 ct

8-32 x 5/8 Set Screw Flat Point Coarse Nylon Patch 100 ct

3/8''-16 x 6-1/2'' Ultrawedge™+ Concrete Anchors, Zinc Plate, ea

5/8''-11 x 3-1/2'', Ultrawedge™ Concrete Anchors, HD Galvanized, 1 ea

M6-1.00 x 16 MM, (FT) Hex Cap Screw, 10.9 Coarse, DIN 933 / ISO 4017, Y/Zinc, 1 ea

M6-1.00 x 70 MM, (PT) Hex Cap Screw, 10.9 Coarse, DIN 931 / ISO 4014, Y/Zinc, 1 ea

5/16"-18 x 5", OAL Turned Eye Bolt W/ Nut Z/P, ea

3/8"-24 x 0.65 OAL Straight Grease Fitting, 1 ea

3/4 Brass Sleeve Ferrules Compression 10 ct

3/4 Brass Nuts Compression 5 ct

3/8 x 5/16 Union Compression 10 ct

3/4" Tee Compression, ea

3/8 x 1/2 Female Adapter Compression 5 ct

5/16" x 1/8", Compression x Male Adapter, ea

#14-14 x 1/2" Phillips Flat Head Screw, Undercut, Type AB 18-8, 100 ea

5/16 x 3/8 Male Elbow Compression

3/8 x 3/8 Female Elbow Compression 1 ct

3/8 x 3/8 Male Run Tee Compression 1 ct

3/8 x 3/8 Male Branch Tee Compression 1 ct

SBS 6-8 3/16 .376-.500x0.675/Steel Dome Head Blind Rivet 500 ct

ABA 6-8 3/16 .376-.500 x 0.675 Dome Head Blind Rivet, 1 ct